[Asterisk-Users] PRIs from two different telco

[C F]

You should really take this up with Digium support, and don't forget
to share your experience.

On 4/27/06, Wai Wu <wwu at calltrol.com> wrote:
>
> My TE411p does not seem to like to have two PRIs from different telcos
> (span 1 and span 2). I can get one working, but not the other. However,
> if I use vpmsupport=0 when loading the wct4xxp module, they both work.
> But here is the problem, vpmsupport=0 disables the on board echo
> cancellation. Any ideas?
>
> BTW, here is zaptel.conf
>
>  span=1,1,0,esf,b8zs
>  span=2,2,0,esf,b8zs
>  bchan=1-23
>  dchan=24
>  bchan=25-47
>  dchan=48
>  loadzone=us
>  defaultzone=us
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>