[Asterisk-Users] PRI configuration

[Wai Wu]

I have a single scsi drive in the system. In a week or so, we will
replace it with a sandisk.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gareth
Blades
Sent: Thursday, April 27, 2006 10:37 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] PRI configuration

Also 


If you see the error Jul 14 13:55:21 NOTICE[19519]: chan_zap.c:7874
pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span
1
only occasionally, then you might have some devices in your pc (ide
cards?) taking to long when taking an intterupt.

You might want to try to put the te411p card on a different cpu, or if
its probably an ide card doing it, try playing with hdparm (make your
drivers slower) or disable that card, and take a new one.

On Thu, 2006-04-27 at 14:58, Wai Wu wrote:
>  
> Hi,
> 
> I am getting this message on the * console on my first pri span. Pri 
> show span show it is down, and I can't make any calls from the span.
> 
> Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:24 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:26 
> NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Overrun (7) on Primary D-channel of span 1
> 
> 
> This is my zapata.conf
> 
> [channels]
> ;
> ; Default language
> ;
> language=en
> ;
> ; Default context
> ;
> context=demo
> ;
> ; Switchtype:  Only used for PRI.
> ;
> ; national:       National ISDN 2 (default)
> ; dms100:         Nortel DMS100
> ; 4ess:           AT&T 4ESS
> ; 5ess:           Lucent 5ESS
> ; euroisdn:       EuroISDN
> ; ni1:            Old National ISDN 1
> ; qsig:           Q.SIG
> ;
> switchtype=national
> ;
> ; Some switches (AT&T especially) require network specific facility IE

> ; supported values are currently 'none', 'sdn', 'megacom', 'accunet'
> ;
> ;nsf=none
> ;
> 
> group = 1
> switchtype=national
> signalling=pri_cpe
> context=demo
> channel => 1-23
> 
> group = 2
> switchtype=national
> signalling=pri_cpe
> context=demo
> channel => 25-47
> 
> Everything else is commented out, and I don't want to include them
here.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users