[Asterisk-Users] PRI configuration

[Gareth Blades]

Quoting http://www.asteriskguru.com/tutorials/e1t1.html


-- configuration on SBC.

If you are being flooded (several times a second, non stop and the pri
never worked) by lines as:

Jul 14 13:55:21 NOTICE[19519]: chan_zap.c:7874 pri_dchannel: PRI got
event: HDLC Abort (6) on Primary D-channel of span 1

Then probably the PRI you are using is not using PRI signalling but
maybe some other type of signalling like E&M.


On Thu, 2006-04-27 at 14:58, Wai Wu wrote:
>  
> Hi,
> 
> I am getting this message on the * console on my first pri span. Pri
> show span show it is down, and I can't make any calls from the span.
> 
> Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:24 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:24 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:24 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:24 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:26 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:26 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:26 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Abort (6) on Primary D-channel of span 1
> Apr 27 07:40:26 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got
> event: HDLC Overrun (7) on Primary D-channel of span 1
> 
> 
> This is my zapata.conf
> 
> [channels]
> ;
> ; Default language
> ;
> language=en
> ;
> ; Default context
> ;
> context=demo
> ;
> ; Switchtype:  Only used for PRI.
> ;
> ; national:       National ISDN 2 (default)
> ; dms100:         Nortel DMS100
> ; 4ess:           AT&T 4ESS
> ; 5ess:           Lucent 5ESS
> ; euroisdn:       EuroISDN
> ; ni1:            Old National ISDN 1
> ; qsig:           Q.SIG
> ;
> switchtype=national
> ;
> ; Some switches (AT&T especially) require network specific facility IE
> ; supported values are currently 'none', 'sdn', 'megacom', 'accunet'
> ;
> ;nsf=none
> ;
> 
> group = 1
> switchtype=national
> signalling=pri_cpe
> context=demo
> channel => 1-23
> 
> group = 2
> switchtype=national
> signalling=pri_cpe
> context=demo
> channel => 25-47
> 
> Everything else is commented out, and I don't want to include them here.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users