[Asterisk-Users] Unable to accept incoming PSTN calls

Thu Apr 27 05:08:41 MST 2006

you have all these includes in your (messy) dial plan
yet you didnt post the files that you use in include.

--- Johnny Stork <stork at openenterprise.ca> wrote:

> I am new to Asterisk and the protocol/language
> complex world of VoIp and PBX. But I have a
> dedicated machine running A at H 2.8, a single TDM400P
> with one FXS module card connected to a standard
> analog phone. The second card is an X100P connected
> to my analog PSTN phone line. I also have Grandsteam
> IP phone plugged into the network and a couple of
> x-lite SIP softphones. I can make outgoing calls on
> the Grandstream or any registered SIP sofware phone
> from any computer. I can also get a dial tone from
> the analog phone connected to the ZAP X100P port.
> But when incoming callas come in, none of the phones
> ring. No VoIP trunks, just the single ZAP trunk from
> the X100P. Below are my configurations and a tail of
> /var/log/asterisk/full when making a call from an
> outside line. There is much more in the
> extensions.conf file but I was not sure how much to
> include and noticed in another post that only a
> couple sections were included. Also, when making an
> outside PSTN call comes in the other
> non-asterisk-connected phones in the house ring
> fine, but none of the asterisk-connected
> extensions/phones?
> 
> sip.conf file:
> 
> [general]
> 
> bindport=5060 ; UDP Port to bind to (SIP standard
> port is 5060)
> bindaddr=0.0.0.0 ; IP address to bind to (0.0.0.0
> binds to all)
> disallow=all
> allow=ulaw
> allow=alaw
> context = from-sip-external ; Send unknown SIP
> callers to this context
> callerid = Unknown
> 
> #include sip_nat.conf
> #include sip_custom.conf
> #include sip_additional.conf
> #include additional_a2billing_sip.conf
> extensions.conf:
> 
> 
> zapata.conf file:
> 
> ;
> ; Zapata telephony interface
> ;
> ; Configuration file
> 
> [trunkgroups]
> 
> [channels]
> 
> language=en
> context=from-pstn
> signalling=fxs_ks
> rxwink=300		; Atlas seems to use long (250ms) winks
> ;
> ; Whether or not to do distinctive ring detection on
> FXO lines
> ;
> ;usedistinctiveringdetection=yes
> 
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=800
> rxgain=0.0
> txgain=0.0
> group=0
> callgroup=1
> pickupgroup=1
> immediate=no
> 
> ;faxdetect=both
> faxdetect=incoming
> ;faxdetect=outgoing
> ;faxdetect=no
> 
> ;Include genzaptelconf configs
> #include zapata-auto.conf
> 
> group=1
> 
> ;Include AMP configs
> #include zapata_additional.conf
> 
> 
> 
> 
> extensions.conf file:
> 
> ; include extension contexts generated from AMP
> #include extensions_additional.conf
> 
> ; Customizations to this dialplan should be made in
> extensions_custom.conf
> ; See extensions_custom.conf.sample for an example
> #include extensions_custom.conf
> 
> [from-trunk] ; just an alias since VoIP shouldn't be
> called PSTN
> include => from-pstn
> 
> [from-pstn]
> include => from-pstn-custom ; create this context in
> extensions_custom.conf to include customizations
> include => ext-did
> ;exten => fax,1,Goto(ext-fax,in_fax,1)
> exten => _.,1,Wait(1)
> exten => _.,2,Goto(from-pstn,s,1)
> 
> var/log/asterisk/full (when recieving a call from
> pstn):
> 
> Apr 26 18:43:33 VERBOSE[2696] logger.c: -- Remote
> UNIX connection
> Apr 26 18:43:52 VERBOSE[25804] logger.c: -- Remote
> UNIX connection disconnected
> Apr 26 18:44:57 VERBOSE[25810] logger.c: -- Starting
> simple switch on 'Zap/1-1'
> Apr 26 18:44:59 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:00 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:00 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:00 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:00 DEBUG[2775] manager.c: Manager
> received command 'Command'
> Apr 26 18:45:00 DEBUG[2775] manager.c: Manager
> received command 'Command'
> Apr 26 18:45:01 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:01 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:01 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:01 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:01 DEBUG[25810] chan_zap.c: Got event
> Ring Begin(1Cool on channel 1 (index 0)
> Apr 26 18:45:02 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:02 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:02 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:03 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:03 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:03 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:03 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:03 DEBUG[25810] chan_zap.c: Got event
> Ring/Answered(2) on channel 1 (index 0)
> Apr 26 18:45:03 DEBUG[25810] chan_zap.c: Setting
> IDLE polarity due to ring. Old polarity was 0
> Apr 26 18:45:04 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:04 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:04 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:05 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:05 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:05 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:06 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:06 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:06 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:07 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:07 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:07 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:07 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:07 DEBUG[25810] chan_zap.c: Got event
> Ring Begin(1Cool on channel 1 (index 0)
> Apr 26 18:45:08 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:08 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:08 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:09 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:09 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:09 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:09 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:09 DEBUG[25810] chan_zap.c: Got event
> Ring/Answered(2) on channel 1 (index 0)
> Apr 26 18:45:09 DEBUG[25810] chan_zap.c: Setting
> IDLE polarity due to ring. Old polarity was 0
> Apr 26 18:45:10 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:10 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:10 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:11 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:11 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:11 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:12 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:12 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:12 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:13 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:13 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:13 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:13 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:13 DEBUG[25810] chan_zap.c: Got event
> Ring Begin(1Cool on channel 1 (index 0)
> Apr 26 18:45:14 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:14 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:14 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:15 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:15 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:15 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:16 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:16 DEBUG[25810] chan_zap.c: Got event
> Ring/Answered(2) on channel 1 (index 0)
> Apr 26 18:45:16 DEBUG[25810] chan_zap.c: Setting
> IDLE polarity due to ring. Old polarity was 0
> Apr 26 18:45:16 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:16 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:16 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:17 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:17 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:17 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:18 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:18 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:18 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:19 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:19 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:19 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:20 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:20 DEBUG[25810] chan_zap.c: Got event
> Ring Begin(1Cool on channel 1 (index 0)
> Apr 26 18:45:20 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:20 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:20 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:21 DEBUG[25810] chan_zap.c: Exception
> on 17, channel 1
> Apr 26 18:45:21 DEBUG[25810] chan_zap.c: Got event
> Ring/Answered(2) on channel 1 (index 0)
> Apr 26 18:45:21 DEBUG[25810] chan_zap.c: Setting
> IDLE polarity due to ring. Old polarity was 0
> Apr 26 18:45:22 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:22 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:22 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:23 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:23 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:23 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:24 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:24 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:24 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:25 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:25 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:25 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:26 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:26 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:26 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:27 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:27 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:27 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:28 VERBOSE[25810] logger.c: --
> Executing Goto("Zap/1-1", "from-pstn|s|1") in new
> stack
> Apr 26 18:45:28 VERBOSE[25810] logger.c: -- Goto
> (from-pstn,s,1)
> Apr 26 18:45:28 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:29 VERBOSE[25810] logger.c: == Spawn
> extension (from-pstn, s, 1) exited non-zero on
> 'Zap/1-1'
> Apr 26 18:45:29 VERBOSE[25810] logger.c: --
> Executing Wait("Zap/1-1", "1") in new stack
> Apr 26 18:45:29 VERBOSE[25810] logger.c: == Spawn
> extension (from-pstn, h, 1) exited non-zero on
> 'Zap/1-1'
> Apr 26 18:45:29 DEBUG[25810] cdr_addon_mysql.c:
> cdr_mysql: inserting a CDR record.
> Apr 26 18:45:29 DEBUG[25810] cdr_addon_mysql.c:
> cdr_mysql: SQL command as follows: INSERT INTO cdr
>
(calldate,clid,src,dst,dcontext,channel,dstchannel,lastapp,lastdata,duration,billsec,disposition,amaflags,accountcode,uniqueid)
> VALUES ('2006-04-26
> 18:44:59','6048481125','6048481125','s','from-pstn',
> 'Zap/1-1','','Wait','1',30,0,'NO
> ANSWER',3,'','1146102297.1')
> Apr 26 18:45:29 DEBUG[25810] chan_zap.c: Hangup:
> channel: 1 index = 0, normal = 17, callwait = -1,
> thirdcall = -1
> Apr 26 18:45:29 DEBUG[25810] chan_zap.c: disabled
> echo cancellation on channel 1
> Apr 26 18:45:29 DEBUG[25810] chan_zap.c: Set option
> TDD MODE, value: OFF(0) on Zap/1-1
> Apr 26 18:45:29 DEBUG[25810] chan_zap.c: Updated
> conferencing on 1, with 0 conference users
> Apr 26 18:45:29 VERBOSE[25810] logger.c: -- Hungup
> 'Zap/1-1'
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com
> --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 