[Asterisk-Users] Problems with Eicon Diva V-4BRI - 2nd Port

[Avi Miller]

Hey guys

This is probably for Armin, but I thought maybe someone else might have 
something I could try. I'm having a problem with one of my Eicon Diva 
V-4BRI cards and I'm trying to work out if its a driver configuration 
error, card failure or telco problem:

I have an Asterisk box running -- the Eicon drivers see all four ports 
on my card, capi.conf is configured with all four ports and when I issue 
a "capi info" on the Asterisk CLI, I see all four ports.

The problem is, I only have two ISDN2 lines connected, to ports one and 
two. I configured capi.conf with only two controllers, but Asterisk 
still sees all four. If I try to dial-out on anything but the first 
port, it just hangs (and I get an engaged tone once two lines are up, 
suggesting that the 2nd port just isn't working properly).

However, I've swapped cables and NT1s, and both lines work in Port 1 of 
the Eicon Diva. But I can't see any configuration difference between 
this server and the other server I have that is working fine across its 
two ports.

Does anyone know of any Eicon diagnostics I can run to see if the second 
port is actually up? I've been through the Diva webinterface, but I'm 
not actually sure what to look for!

Thanks,
Avi

-- 
National Manager - Special Projects

< Sydney / Melbourne / Canberra / Hobart / London />
   2/340 Gore Street      T: +61 (0) 3 9486 0411
   Fitzroy, VIC           F: +61 (0) 3 9486 0611
   3065                   W: http://www.squiz.net/

.....>> Open Source  - Own it  -  Squiz.net ...../>