[Asterisk-Users] Excessive Asterisk delay to answer on ZAP inboundcall

kevin ling kevin.ling at amphenol.com.tw
Wed Apr 26 07:44:59 MST 2006


Hi,

I have make some test. If asterisk can decode the callerid. The asterisk
will answer the call after 2 rings. But when asterisk have some problem to
get the callerid. Asterisk pickup the call after 3-4 rings.

Regards,
Kevin 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Giorgio
Incantalupo
Sent: Wednesday, April 26, 2006 4:59 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Excessive Asterisk delay to answer on ZAP
inboundcall

Hi,
I have an asterisk 1.2.1 on a Debian Sarge distro with *three* TDM400P
(12 fxo ports). I noticed Asterisk is slow to answer inbound calls so I
connected an analog phone in parallel to make a test:

                  __________Asterisk fxo
---- line -----|
                 -----------------Analog phone

The analog phone rings immediately when calling, while asterisk shows the
message "Starting simple switch on zap..."  after the first ring and
executes the old extension script after the second ring (for example a NoOp
instruction).

Why does Asterisk wait for these two rings? What is it doing meanwhile? 
Is it possible to shorten this interval to have an immediate response?

TIA

Giorgio Incantalupo

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list