[Asterisk-Users] MFCR2 in Brazil, someone?

Moises Silva moises.silva at gmail.com
Wed Apr 26 06:40:12 MST 2006


I forgot. I dont think versions matter since i have tried a lot. But
current versions are the most recent in soft-switch. I think is 0.0.3
for libunicall and libmfcr and spandsp.

On 4/26/06, Moises Silva <moises.silva at gmail.com> wrote:
> Hi Melcon, thanks for answering. That means you have a working installation?
>
> Were using a Tormenta 4 ports card.
>
> unicall.conf is not important. Im not using asterisk to test. Im using
> "testcall", the program that comes with unicall distribution. I have
> done a couple of installations in Mexico with digiums card and sangoma
> card, but this is the first one in brazil and with tormenta card. I
> use testcall because is easier to detect problems. From logging the
> tone signaling I know the first tone is sent to the telco, but we
> never get a tone back, so the same first tone we sent keeps there
> until the 5 seconds of T1 timer expires. I have incremented the timer,
> but does the same, the tone keeps there until the timer expires.
>
> zaptel.conf is:
>
> span=1,1,0,cas,hdb3
> cas=1-15:1101
> dchan=16
> cas=17-31:1101
>
> giving a cat to /proc/zaptel/1 show all the channels configured
> properly. But also shows a message like this:
>
>       BPV count: 192
>       FAS error count: 6
>
> Not sure what it means, i will start looking in google and the source code.
>
> Any help, hint, advice will be appreciated.
>
>
>
> On 4/25/06, Melcon Moraes <levelz at terra.com.br> wrote:
> > Which version of unicall and spandsp are you using? How is your
> > zaptel.conf and unicall.conf?
> >
> > []'s
> > MM
> >
> >  -----Original Message-----
> > From:   "Moises Silva" <moises.silva at gmail.com>
> > To:     "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com>
> > Cc:
> > Sent:  Tue, 25 Apr 2006 12:45:41 -0500
> > Delivered:  Tue,  25 Apr 2006 11:48:34
> > Subject:[Asterisk-Users] MFCR2 in Brazil, someone?
> >
> > Does anybody have a working Asterisk server with Unicall using MFCR2
> > in Brazil? Were having problems. It seems SPANDSP never detect the
> > tones from the telco. Im using brazil protocol variant.  Im having
> > lots of problems
> > to find out why spandsp seems to not detect the MF tones. We send the
> > first digit, the telco says they receive it, and respond with the proper
> > signal to ask for the next digit, we just never detect the tone and the T1
> > timer times up. Some custom logs i have put in mfcr2.c point to spandsp
> > r2_mf_rx always returning a zero value, what seems to mean OFF TONE,
> > because it automatically sends the code to mf_tone_off_event() but without
> > expecting tone because it never enters to mf_tone_on_event()
> >
> > something like this:
> >
> > OUR PBX =========>  seize ============> TELCO
> >         <=========  seize ACK <=======
> >         ==========> First DNIS tone ==>
> >                          here we never detect the tone from the telco
> >
> > the server is Linux switch-cwb.jeffnetworks.com 2.6.9-34.ELsmp #1 SMP Thu
> > Mar 9 06:23:23 GMT 2006 x86_64 x86_64 x86_64 GNU/Linux
> >
> > already tried different spandsp versions without success.
> >
> > Thanks in advance.
> >
> > --
> > "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > E-mail classificado pelo Identificador de Spam Inteligente Terra.
> > Para alterar a categoria classificada, visite
> > http://mail.terra.com.br/protected_email/imail/imail.cgi?+_u=levelz&_l=1,1145987314.216908.1433.arrino.terra.com.br,5013,Des15,Des15
> >
> >
> >  --Original Message Ends--
> >
> > --
> > Melcon Moraes <melcon.moraes at terra.com.br>
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
> --
> "Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"
>


--
"Su nombre es GNU/Linux, no solamente Linux, mas info en http://www.gnu.org"



More information about the asterisk-users mailing list