[Asterisk-Users] does anyone know anything about chan_btp or btpd?

[Mike Garey]

I've tried posting a simple message twice, regarding using chan_btp to
dial a phone number through a Zap interface, but I've received no
answers, and I can't seem to figure out how to do what I want (which
seems to be a pretty typical use of chan_btp - I mean, isn't it used
to dial peoples' phone numbers when their bluetooth device is not
present?).  I was wondering if anyone could point me in the direction
of anyone who may know a bit about the chan_btp driver (developers,
users, whatever).

My original question is posted below in case anyone can help:

Can anyone tell me how me to get asterisk to dial out a phone number using BTP
when a bluetooth device is not detected?  I can get BTP to dial to a
SIP phone, but I can't get it to dial through a POTS phone line using
the Zap interface..

I've tried putting the following under the clients section in
/etc/asterisk/btp.conf:

client =>user,00:12:34:56:78:90,Zap/4/1234567890

and in extensions.conf:

exten => 222,1,Playback(pls-hold-while-try)
exten => 222,2,Dial(BTP/user,60,m)
exten => 222,3,Hangup

but asterisk doesn't dial the phone number 1234567890, it simply does:

Zap/4-1 answered SIP/304-fc8a

and then gives me a dial tone..  From btp.conf, it says:

;If a default channel is specified, we
; use that channel if nobody has found the bluetooth device.

so it seems as though I can connect to a channel (in this case Zap/4),
but I can't actually get the channel to dial the given phone number..
If anyone can tell me what I'm doing wrong, I would very much
appreciate it.  Thanks,

Mike