[Asterisk-Users] PRI caller ID

[Mimmus]

Perpahs you need a Wait(2) before Answer() in the dialplan, because telco
send CallerIDName after some time (second ring, I suppose).

Mimmus


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Jonathan k. Creasy
> Sent: Wednesday, April 19, 2006 3:28 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] PRI caller ID
> 
> I searched through the archives and the wiki...don't be so 
> pissy...i missed it I guess, my bad....
> 
> -Jonathan
> 
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users- 
> > bounces at lists.digium.com] On Behalf Of Jerry Jones
> > Sent: Wednesday, April 19, 2006 9:17 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] PRI caller ID
> > 
> > Pleaase read the archives or the wiki - you will shortly 
> find you need 
> > a wait in your dialplan
> > 
> > 
> > On Apr 19, 2006, at 8:10 AM, Jonathan k. Creasy wrote:
> > 
> > > Below is a snipped debug on our PRI. We are getting 
> number only for 
> > > the CallerID but the telco says they are sending us Name 
> and Number. 
> > > We are getting the Name in a second frame but Asterisk is not 
> > > passing it to the device it rings. The message below says 
> > > "Presenation allowed of network provided number" which 
> leads me to 
> > > believe Asterisk thinks it should not be displaying it. 
> Can anyone 
> > > interpret this for me and maybe shed some light on why I am not 
> > > getting the caller ID name displayed? I have asreceived in my 
> > > Zapata.conf file.
> > >
> > >
> > >
> > >
> > >
> > > < Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 
> 0xa1, 0x0f, 
> > > 0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 
> > > 0x04, 0x0a, 0x01, 0x00 ]
> > >
> > > < [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37]
> > >
> > > < Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:
> > > ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> > >
> > > <                           Presentation: Presentation allowed of
> > > network provided number (3) '5028895567' ]
> > >
> > > < [70 08 c1 33 31 35 30 35 36 36]
> > >
> > > < Called Number (len=10) [ Ext: 1  TON: Subscriber Number 
> (4)  NPI:
> > > ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ]
> > >
> > > Handle Q.932 ROSE Invoke component
> > >
> > > Don't know what to do if second ROSE component is of type 0x6
> > >
> > > Sending Receiver Ready (84)
> > >
> > >
> > >
> > > < Message type: FACILITY (98)
> > >
> > > < [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 
> 6c 6c 20 50 
> > > 68 6f 6e 65 20 20 20 4b 59]
> > >
> > > < Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 
> 0xa1, 0x17, 
> > > 0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, 
> > > 'Phone', 0x20, 0x20, 0x20, 'KY' ]
> > >
> > >
> > >
> > > -Jonathan
> > >
> > >
> > >
> > > Jonathan Creasy
> > > Network Engineer
> > >
> > > BluegrassNet Development
> > >
> > > www.bgnd.com www.bluegrass.net
> > >
> > > o. 502-589-4638
> > >
> > > c. 502-889-5567
> > >
> > > h. 502-541-0566
> > >
> > >
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
> 
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>