[Asterisk-Users] PRI caller ID

[Jonathan k. Creasy]

Below is a snipped debug on our PRI. We are getting number only for the
CallerID but the telco says they are sending us Name and Number. We are
getting the Name in a second frame but Asterisk is not passing it to the
device it rings. The message below says "Presenation allowed of network
provided number" which leads me to believe Asterisk thinks it should not
be displaying it. Can anyone interpret this for me and maybe shed some
light on why I am not getting the caller ID name displayed? I have
asreceived in my Zapata.conf file. 

 

 

< Facility (len=23, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x0f,
0x02, 0x01, 0x01, 0x06, 0x07, 0x2a, 0x86, 'H', 0xce, 0x15, 0x00, 0x04,
0x0a, 0x01, 0x00 ]

< [6c 0c 21 83 35 30 32 38 38 39 35 35 36 37]

< Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)

<                           Presentation: Presentation allowed of
network provided number (3) '5028895567' ]

< [70 08 c1 33 31 35 30 35 36 36]

< Called Number (len=10) [ Ext: 1  TON: Subscriber Number (4)  NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '3150566' ]

Handle Q.932 ROSE Invoke component

Don't know what to do if second ROSE component is of type 0x6

Sending Receiver Ready (84)

 

< Message type: FACILITY (98)

< [1c 1d 9f 8b 01 00 a1 17 02 01 01 02 01 00 80 0f 43 65 6c 6c 20 50 68
6f 6e 65 20 20 20 4b 59]

< Facility (len=31, codeset=0) [ 0x9f, 0x8b, 0x01, 0x00, 0xa1, 0x17,
0x02, 0x01, 0x01, 0x02, 0x01, 0x00, 0x80, 0x0f, 'Cell', 0x20, 'Phone',
0x20, 0x20, 0x20, 'KY' ]

 

-Jonathan

 

Jonathan Creasy
Network Engineer

BluegrassNet Development

www.bgnd.com www.bluegrass.net

o. 502-589-4638

c. 502-889-5567

h. 502-541-0566

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060419/2df6a818/attachment.htm