[Asterisk-Users] T1 to cross connect remote PBX and asterisk

[Jim Houser]

Daaah, you are correct.
A typo on my part, not a cut & paste from my actual build.
Make that span=1,1,0,esf,b8zs


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Doug Lytle
Sent: Tuesday, April 18, 2006 2:37 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] T1 to cross connect remote PBX and asterisk

Jim Houser wrote:
> I have our Avaya connected to Asterisk using NI D channel protocol 
> over a standard ESF/B8ZS span.  It works great.
>  
> span=1,0,0,esf,b8zs

Shouldn't you be getting your timing from the Avaya?

Doug

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



This e-mail and any attachments may contain confidential and privileged information.  If you are not the intended recipient, please notify the sender, or postmaster at trustamerifirst.com, immediately by return e-mail and destroy any copies. Any dissemination or use of this information by a person other than the intended recipient is unauthorized and may be illegal.  Unless otherwise stated, opinions expressed in this e-mail are those of the author and are not endorsed by the author's employer.