[Asterisk-Users] T1 to cross connect remote PBX and asterisk

[C F]

In theory it should work, I have just written a proposal for someone
that involves such a setup. in worst case I can always utilize the
circuit as data, and use 2 asterisk boxes one on each end to convert
it back to NI2.

On 4/18/06, Damon Estep <damon at suburbanbroadband.net> wrote:
>
>
>
> Looking for someone with a successful experience similar to this;
>
>
>
> I have a need to cross connect a 3COM NBX PBX PRI interface to asterisk, but
> over a long distance. We do not need any IP connectivity and the solution
> requires G.711u audio so there is no benefit to using IP.
>
>
>
> Has anyone here successfully cross connected any PBX PRI interface expecting
> NI2 PRI signaling B8ZS/ESF with an asterisk box providing PRI_Network
> signaling on a T1 interface card using a long haul point to point ESF/B8ZS
> T1?
>
>
>
> I do not need the technical details on how to set up asterisk or the remote
> PBX, just need a sanity check on the idea of using the PTP T1 as a cross
> connect facility. If they were local to each other I would simply drop in a
> T1 crossover cable, but they are not J
>
>
>
> Thanks!
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>