[Asterisk-Users] Cisco 7960 International

[Shaun]

I'm having a problem with my Cisco 7960 phones with the SIP image.  When i 
try to dial a international number i keep getting a busy signal but i dont 
see anything on the asterisk console (-vvvvvvvvvc) like i do when i dial 
local or long distance numbers.  It makes me think the phone is doing this 
and not sending the request.  I tryed blanking out the dialplan.xml with the 
below config.

<DIALTEMPLATE>
        <TEMPLATE MATCH="*"              Timeout="15"/>             <!--  
Anything else -->
</DIALTEMPLATE>

and i even tryed the default config of

<DIALTEMPLATE>
        <TEMPLATE MATCH="0"              Timeout="1" User="Phone"/> <!--  
Local operator-->
        <TEMPLATE MATCH="9,011*"         Timeout="6" User="Phone"/> <!--  
International calls-->
        <TEMPLATE MATCH="9,0"            Timeout="8" User="Phone"/> <!--  
PSTN Operator-->
        <TEMPLATE MATCH="9,11"           Timeout="0" User="Phone" 
Route="Emergency" Rewrite="9911"/>
        <TEMPLATE MATCH="w!"             Timeout="1" User="PHONE" 
Route="Emergency" Rewrite="9911"/>
        <TEMPLATE MATCH="9,.11"          Timeout="0" User="Phone"/> <!--  
Service numbers -->
        <TEMPLATE MATCH="9,1.........."  Timeout="0" User="Phone"/> <!--  
Long Distance -->
        <TEMPLATE MATCH="9,......."      Timeout="0" User="Phone"/> <!--  
Local numbers -->
        <TEMPLATE MATCH="8,......."      Timeout="0" User="Phone"/> <!--  
Corporate Dial plan-->
        <TEMPLATE MATCH="1..."          Timeout="0" User="Phone"/> <!--  
Internal Extentions -->
        <TEMPLATE MATCH="*"              Timeout="15"/>             <!--  
Anything else -->
</DIALTEMPLATE>


Anybody know whats going on here?  The number i'm trying to dial is 
9011905326471XXX for testing...

--

~Shaun