[Asterisk-Users] Oh323 inband DTMF

[Tomislav Parčina]

Hi group!

Does DTMF inband work with oh323 channel driver ver. 0.6.7? If yes, how to enable it, make it work? I have tried with "inBandDTMF=yes" in general context of oh323.conf, but I get this message when I * is starting. 

 [chan_oh323.so] => (InAccess Networks OpenH323 Channel Driver)
  == Parsing '/etc/asterisk/rtp.conf': Found
  == Parsing '/etc/asterisk/oh323.conf': Found
Apr 12 13:38:17 NOTICE[3622]: chan_oh323.c:4813 reload_config: Ignoring unknown
H.323 [general] keyword 'silenceSuppression', line 49.
Apr 12 13:38:17 NOTICE[3622]: chan_oh323.c:4813 reload_config: Ignoring unknown
H.323 [general] keyword 'inBandDTMF', line 53.
  == Registered channel type 'OH323' (InAccess Networks OpenH323 Channel Driver)
  == OpenH323 Channel Ready (v0.6.7)

So, how to enable inband?


--
Tomislav Parcina
tparcina#lama.hr





*CLI> oh323 show conf

 Configuration of OpenH323 channel driver
------------------------------------------
Version: 0.6.7
Listening on address: 85.114.48.254:1720
Gatekeeper used:  No gatekeeper
FastStart/H245Tunnelling/H245inSetup: ON/ON/ON
Supported formats in pref. order: alaw<0>
Jitter buffer limits (min/max): 20-100 ms
TCP port range: 10000 - 20000
UDP (RAS) port range: 10000 - 20000
UDP (RTP) port range: 10000 - 20000
IP Type-of-Service value: 0
User input mode: tone
Max number of inbound H.323 calls: 10
Max number of outbound H.323 calls: 10
Max number of simultaneous H.323 calls: 10
Max call rate (ingress direction): 1.00/30
Default language: en
Default music class: default
Default context: incomingh323