AW: [Asterisk-Users] Dial out on Zap: Can't fix up channel from 31 to 30 because 30 is already in use??

[Marcus.Rothe at bertelsmann.de]

I'm not sure if it's the same problem but your error message likely the same. 
after i additing pridialplan=local in the zapata.conf i'm able to make outboundcalls (located in germany)

marcus

-----Ursprüngliche Nachricht-----
Von: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] 
Gesendet: Dienstag, 11. April 2006 16:33
An: asterisk-users at lists.digium.com
Betreff: [Asterisk-Users] Dial out on Zap: Can't fix up channel from 31 to 30 because 30 is already in use??

Hi,

I still cant dial out on Zap and I really have no clue why.
I'm using Asterisk Asterisk 1.2.6 and Zaptel 1.2.5 with Digium card 4 ports, 31 channels each and able to receive incoming calls and fax perfectly.

I've done this in my dial plan.

exten => 111,1,Answer()
exten => 111,n,Ringing()
exten => 111,n,Wait(2)
exten => 111,n,AbsoluteTimeout(30)
exten => 111,n,Dial(Zap/G1/002212601574) exten => 111,n,NoOp(${DIALSTATUS}) exten => 111,n,Busy() exten => 111,n,Hangup()

My zapata.conf is like this


[channels]
context=from-pstn
group=0
switchtype=euroisdn
overlapdial=yes
faxdetect=no
echocancel=yes
echocancelwhenbridged=yes


; PRI port 1 (E1)
; context=1
group=1
signalling=pri_cpe
channel=>1-15,17-31


And I've got this on my CLI:

   -- Accepting overlap call from '2212601571' to '111' on channel 0/31, span 1
    -- Starting simple switch on 'Zap/31-1'
    -- Executing Answer("Zap/31-1", "") in new stack
    -- Executing Ringing("Zap/31-1", "") in new stack
    -- Executing Wait("Zap/31-1", "2") in new stack
    -- Executing AbsoluteTimeout("Zap/31-1", "30") in new stack
    -- Set Absolute Timeout to 30
    -- Executing Dial("Zap/31-1", "Zap/G1/002212601574") in new stack
    -- Requested transfer capability: 0x00 - SPEECH
    -- Called G1/002212601574
    -- Moving call from channel 31 to channel 30 Apr 11 16:27:06 WARNING[10322]: chan_zap.c:7745 pri_fixup_principle: 
Can't fix up channel from 31 to 30 because 30 is already in use Apr 11 16:27:06 WARNING[10322]: chan_zap.c:9046 pri_dchannel: Unable to move channel 30!
    -- Channel 0/30, span 1 got hangup request Apr 11 16:27:06 WARNING[10966]: app_dial.c:706 wait_for_answer: Unable to forward voice
    -- Hungup 'Zap/30-1'
  == Everyone is busy/congested at this time (1:0/0/1)
    -- Executing NoOp("Zap/31-1", "CHANUNAVAIL") in new stack
    -- Executing Busy("Zap/31-1", "") in new stack
    -- Channel 0/31, span 1 got hangup request
  == Spawn extension (from-pstn, 111, 7) exited non-zero on 'Zap/31-1'
    -- Executing NoOp("Zap/31-1", "") in new stack
    -- Executing Goto("Zap/31-1", "999") in new stack
    -- Goto (from-pstn,h,999)
    -- Hungup 'Zap/31-1'



Could somebody give me a clue?


Pim

_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users