[Asterisk-Users] Asterisk Dial Command Timeout not Accurate (not even close)

[Peter J Dean]

The Dial line that I am using, which is called from within a Macro;

	exten => s,n(dialextension),Dial(SIP/${ARG1:-3},15,tT)

Where ARG1 is a 3-digit extension number.

On 10/04/2006, at 9:24 PM, Eric ManxPower Wieling wrote:

> Peter J Dean wrote:
>> I have an issue with trying to ensure that when dialling an  
>> extension that it continues to ring up to the timeout value. But  
>> what I am finding is that the timeout is all over the place.  
>> Sometimes half the timeout value and other times within a few  
>> seconds of the timeout value.
>> I am running with the following software versions on a Dell PE2550  
>> dual-processor server that is not under load;
>>     Red Hat FC4 Kernel 2.6.15-1.1830_FC4smp
>>     Asterisk Version 1.2.6
>>     Zaptel Version 1.2.5
>>     Libpri Version 1.2.2
>>     Addons Version 1.2.2
>>     Sounds Version 1.2.1
>> How do I ensure that the dial command timeout is somewhat more  
>> accurate.
>
> I have not experienced this exact problem.  Paste a copy of your  
> Dial line.  I have experienced something similar -- I was dialing  
> out of an analog FXO port.  Asterisk considers the call "answered"  
> as soon as it's finished dialing out of an ANALOG FXO port.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users