[Asterisk-Users] oh323.conf problem

[Tomislav Parčina]

I have installed oh323 channel driver (finaly! :)). I head some problem starting * so I have put the smallest possible oh323.conf file to se what happens. When I don't put available codec's in oh323.conf (*1) Asterisk starts but he also disables h323 channel because there are no available codec's (*2). 

When I put codec (*3) Asterisk doesn't start (*4). 

What have I done wrong? I have tested several codec's with several frames, but I haven't find combination that works.

I'm using Asterisk-1.2.6, pwlib_Mimas_patch2, openh323_Mimas_patch2 and asterisk-oh323-0.7.3 channel driver.

Below is the conf file and CLI output.

--

Tomislav Parcina

 

*1
Oh323.conf
[general]
listenAddress=0.0.0.0
listenPort=1720
outboundMax=100
inboundMax=100
simultaneousMax=100
context=sip

[register]
alias=asterisk
alias=123

[codecs]
; no codec defined

*2
== Parsing '/etc/asterisk/oh323.conf': Found
Apr 9 10:37:57 WARNING[4015]: chan_oh323.c:5008 reload_config: Category [codecs
] not present in configuration file (oh323.conf).
Apr 9 10:37:57 NOTICE[4015]: chan_oh323.c:5227 load_module: No codecs configure
d! Disabling H.323 channel driver.

*3
[general]
listenAddress=0.0.0.0
listenPort=1720
outboundMax=100
inboundMax=100
simultaneousMax=100
context=sip

[register]
alias=asterisk
alias=123

[codecs]
codec=G711A
frames=20

*4
[chan_oh323.so] => (InAccess Networks OpenH323 Channel Driver)
== Parsing '/etc/asterisk/rtp.conf': Found
== Parsing '/etc/asterisk/oh323.conf': Found
Illegal instruction
[root at pbx83 ~]#