[Asterisk-Users] suggestions on an IP T1 to TDM T1 gateway solution

[Damon Estep]

Can anyone offer up a suggestion on a reliable and cost effective
customer premise hardware setup to be able to take an inbound IP T1 and
deliver a PRI interface to a remote office?

 

Trying to reduce the amount of hardware required to implement this,
right now we use a Cisco router to take the IP T1 in on a serial port
and then we go Ethernet to a slimmed asterisk box with a single port T1
card, and from there to the PBX PRI port.

 

Seems like we should be able to skip the router and build an asterisk
solution with 2 T1 ports, one for the data T1 and one to the PBX (PRI),
and then an Ethernet connection to the LAN/Firewall.

 

Maybe there is a non asterisk solution that works well with asterisk?

 

The other end is asterisk as well.

 

Anyone done this successfully on a single device?

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060407/fdc0daf9/attachment.htm