[Asterisk-Users] zaphfc NT Mode. Extension not recognized...

[Benoit Panizzon]

Hi all

I finaly set up a second * with two ZapHFC Cards. One in TE the other in NT 
mode.

So I have a 1.2.5 Asterisk to run Meetme etc... and a 1.2.4 Asterisk to run 
all that Zaptel stuff. First I used mISDN on 1.2.5 which worked, but 
sometimes had strange behaviour.
So my hope was that zaptel is more stable...

It steams realy stable in TE mode. No problem there.

But I get a very strange behaviour in NT mode. I have two different ISDN 
phones here. Booth worked with mISDN. Only one can dial with zaphfc. With the 
other * does not recognize the dialed extension...

Here is what I get:

Phone 1 (working one):
I press 11 and take it of hook:
  == Primary D-Channel on span 1 up for TEI 64
    -- Extension '11' in context 'from-zap' from '0010618115711' does not 
exist.

This is fine. I dialed 11 and it actuely does not exist.

Phone 2 (the one which is unable to dial)
I press 11 and then take it off-hook:
  == Primary D-Channel on span 1 up for TEI 64
    -- Accepting voice call from '010618115711' to 's' on channel 0/2, span 1
    -- Executing NoOp("Zap/2-1", "BLAH s") in new stack

I seam not to find any way to get the dialed extension passed from the phone 
to *.

What am I doing wrong? I did try DISA to check if the number is passed after 
the phone is off hook, but this just doesn't seam the case...

The extension was recognized with mISDN.

Any ideas?

-Benoit-