[Asterisk-Users] IAX2 hard phone

[f6hqz-m at hamwlan.net]

Hello Alberto,

You must upgrade the firmware by taking the last one at www.aredfox.com
which is the PA168 manufacturer.
Mine Ip-phones are running well with IAX2 and flash hook for transferts.

Good luck.

Best Regards,
Francois BERGERET,
France.


-----Message d'origine-----
De : asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] De la part de Alberto Risco
Envoyé : mardi 27 septembre 2005 15:06
À : asterisk-users at lists.digium.com
Objet : [Asterisk-Users] IAX2 hard phone


I purchased an IAX2 hardphone, X100 otherwise known as a Netweb X100 or
YWH100 with a PA168 chip and the latest firmware 1.45 available, from a US
retailer.  I was able to configure the phone to work with my Asterisk box,
except the hold and transfer buttons do not work.  When you press the hold
button, it rings endlessly, the transfer button, displays “transferring” but
it does nothing.  Has anybody with these phones run into similar problems?
Or can recommend a good functional IAX2 hard phone.
 
 
Thanks,
 
Alberto
 
The contents of this email message and any attachments are confidential and
are intended solely for addressee. The information may also be legally
privileged. This transmission is sent in trust, for the sole purpose of
delivery to the intended recipient. If you have received this transmission
in error, any use, reproduction or dissemination of this transmission is
strictly prohibited. If you are not the intended recipient, please
immediately notify the sender by reply email and delete this message and its
attachments, if any.