[Asterisk-Users] failed make install on Solaris 10
Joseph Rothstein
jrothstein at comcentrixs.com
Tue Sep 27 02:19:20 MST 2005
I finally got Solaris to successfully make asterisk, using these
instructions:
http://sunfreeware.com/programlistsparc10.html#gcc33
Now though, when I issue the make install, I get this error:
mkdir -p /var/opt/asterisk/spool/system
mkdir -p /var/opt/asterisk/spool/tmp
mkdir -p /var/opt/asterisk/spool/meetme
install -m 755 asterisk /opt/asterisk/usr/sbin/
install: asterisk was not found anywhere!
make: *** [bininstall] Error 2
root at b-rz1-voicemail-2 #
I would prefer not to install everything manually if possible. Anyone have
any ideas how I get around this? Asterisk is clearly in the directory, but
for some reason Solaris can't pick it up.
Regards,
Joe
--- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
> On Mon, Sep 26, 2005 at 10:00:10PM -0400, Patrick
> wrote:
> >
> > I know it seems basic but did you make sure and
> plug power into the
> > board when you installed it into the PCI slot? I
> spent about three hours
> > trying to get the dang thing to work in my machine
> until I decided to
> > stick the card into another PCI slot. That is when
> I noticed that I had
> > forgotten to ALSO plug power into the board from
> the power supply.
> > Everything worked fine after that (yep, I was a
> noob). :-)
>
> You get a messge about it from the module at module
> load time. rmmod
> wctdm (or wcfxo) and re- modprobe it, and then run:
>
> dmesg |tail
>
> --
> Tzafrir Cohen | tzafrir at jbr.cohens.org.il |
> VIM is
> http://tzafrir.org.il | |
> a Mutt's
> tzafrir at cohens.org.il | |
> best
> ICQ# 16849755 | |
> friend
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com
> --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
------------------------------
Message: 19
Date: Tue, 27 Sep 2005 00:15:14 -0700 (PDT)
From: somesh s <someshss at yahoo.com>
Subject: Re: [Asterisk-Users] Re: Problem setting up TDM22B card
To: Tzafrir Cohen <tzafrir at cohens.org.il>
Cc: Asterisk Users <asterisk-users at lists.digium.com>
Message-ID: <20050927071514.166.qmail at web32915.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Hi,
I know some bits about zaptel.conf and zapata.conf but
problem is modules wctdm, wcfxo, wcfxs are not getting
loaded.
modprobe zaptel is successful!
Regards,
Somesh S. Shanbhag
--- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
> On Sun, Sep 25, 2005 at 11:50:06PM -0700, somesh s
> wrote:
> > Hi,
> >
> > I got the following output when I run the command.
> >
> > >>>>>>>>>>>>>>> genzaptelconf -svd
> >>>>>>>>>>>>>>>>
> >
> > ./genzaptelconf: line 616: /etc/init.d/asterisk:
> No
>
> The script assumes that there is an
> /etc/init.d/asterisk script.
>
> Please stop asterisk manually.
>
> > such file or directory
> > Unloading zaptel modules:
> > wcusb zaptel
> > Test Loading modules:
> > - zaptel
> > - zaphfc
> > - qozap
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wctdm
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wcfxo
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wcfxs
> > - pciradio
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - tor2
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - torisa
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wct1xxp
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wct4xxp
> > Hint: insmod errors can be caused by incorrect
> module
> > parameters, including
> > invalid IO or IRQ parameters.
> > You may find more information in syslog or
> the
> > output from dmesg
> > - wcte11xp
> > - wcusb
> > - ztd_eth
>
> It tries and fails to load many modules. This is
> expected, as you don't
> have their hardware.
>
> However can you load any zaptel module using
> modprobe?
> What's the output of: 'lsmod | grep zaptel'
>
> BTW: if you have a good idea of what should be in
> zaptel.conf and
> zapata.conf, I figure you should write them manually
> and not waste too
> much time on that automated script. It is meant to
> save time, not to
> spend time.
>
> > Updating '/etc/default/zaptel'
> > Generating '/etc/zaptel.conf'
> > Generating '/etc/asterisk/zapata-channels.conf'
> > Reconfiguring identified channels
> >
> > Zaptel Configuration
> > ======================
> >
> >
> > Channel map:
> >
> >
> > 0 channels configured.
> >
> > ./genzaptelconf: line 653: /etc/init.d/asterisk:
> No
> > such file or directory
> > Checking channels configured in Asterisk:
> > ./genzaptelconf: line 665: asterisk: command not
> found
> >
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> >
> > What may be the problem? Help me in this regard.
> >
> > Regards,
> > Somesh S. Shanbhag
> >
> > --- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
> >
> > > On Sun, Sep 25, 2005 at 10:42:52PM -0700, somesh
> s
> > > wrote:
> > > > Hi,
> > > >
> > > > Can you please give me some details about the
> link
> > > > you have sent? I am not aware of what it does?
> > > >
> > > > [http://tzafrir.org.il/genzaptelconf]
> > >
> > > It is a bash script for generating zaptel.conf
> and
> > > zapata.conf according
> > > to the current settings.
> > >
> > > To use it:
> > >
> > > wget http://tzafrir.org.il/genzaptelconf
> > > bash genzaptelconf -h # gives help
> > >
> > > Try -s and -v . -d is probably not recommended
> if
> > > you have more thn one
> > > card, I figure.
> > >
> > >
> > > >
> > > > Regards,
> > > > Somesh S. Shanbhag
> > > >
> > > > --- Tzafrir Cohen <tzafrir at cohens.org.il>
> wrote:
> > > >
> > > > > On Fri, Sep 23, 2005 at 06:22:06AM -0700,
> somesh
> > > s
> > > > > wrote:
> > > > > > Hi Steve,
> > > > > >
> > > > > > This is zaptel.conf. Can you please tell
> me if
> > > you
> > > > >
> > > > > > require to see more conf files?
> > > > > >
> > > > > > [zaptel.conf]
> > > > > > loadzone = us
> > > > > > defaultzone=us
> > > > > > fxoks=1-2
> > > > > > fxsks=3-4
> > > > >
> > > > > http://tzafrir.org.il/genzaptelconf
> > > > >
> > > > > Should auto-detect zaptel.conf settings.
> Just in
> > > > > case you're not sure.
> > > > >
> > > > > --
> > > > > Tzafrir Cohen |
> > > tzafrir at jbr.cohens.org.il |
> > > > > VIM is
> > > > > http://tzafrir.org.il |
>
=== message truncated ===
______________________________________________________
Yahoo! for Good
Donate to the Hurricane Katrina relief effort.
http://store.yahoo.com/redcross-donate3/
------------------------------
Message: 20
Date: Tue, 27 Sep 2005 00:17:43 -0700 (PDT)
From: somesh s <someshss at yahoo.com>
Subject: Re: [Asterisk-Users] Re: Problem setting up TDM22B card
To: Tzafrir Cohen <tzafrir at cohens.org.il>
Cc: Asterisk Users <asterisk-users at lists.digium.com>
Message-ID: <20050927071743.451.qmail at web32915.mail.mud.yahoo.com>
Content-Type: text/plain; charset=iso-8859-1
Hi,
And I have the digium's hardware too in one of my PCI
slots.
Regards,
Somesh S. Shanbhag
--- somesh s <someshss at yahoo.com> wrote:
> Hi,
>
> I know some bits about zaptel.conf and zapata.conf
> but
>
> problem is modules wctdm, wcfxo, wcfxs are not
> getting
> loaded.
>
> modprobe zaptel is successful!
>
> Regards,
> Somesh S. Shanbhag
>
>
>
> --- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
>
> > On Sun, Sep 25, 2005 at 11:50:06PM -0700, somesh s
> > wrote:
> > > Hi,
> > >
> > > I got the following output when I run the
> command.
> > >
> > > >>>>>>>>>>>>>>> genzaptelconf -svd
> > >>>>>>>>>>>>>>>>
> > >
> > > ./genzaptelconf: line 616: /etc/init.d/asterisk:
> > No
> >
> > The script assumes that there is an
> > /etc/init.d/asterisk script.
> >
> > Please stop asterisk manually.
> >
> > > such file or directory
> > > Unloading zaptel modules:
> > > wcusb zaptel
> > > Test Loading modules:
> > > - zaptel
> > > - zaphfc
> > > - qozap
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wctdm
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wcfxo
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wcfxs
> > > - pciradio
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - tor2
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - torisa
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wct1xxp
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wct4xxp
> > > Hint: insmod errors can be caused by incorrect
> > module
> > > parameters, including
> > > invalid IO or IRQ parameters.
> > > You may find more information in syslog or
> > the
> > > output from dmesg
> > > - wcte11xp
> > > - wcusb
> > > - ztd_eth
> >
> > It tries and fails to load many modules. This is
> > expected, as you don't
> > have their hardware.
> >
> > However can you load any zaptel module using
> > modprobe?
> > What's the output of: 'lsmod | grep zaptel'
> >
> > BTW: if you have a good idea of what should be in
> > zaptel.conf and
> > zapata.conf, I figure you should write them
> manually
> > and not waste too
> > much time on that automated script. It is meant to
> > save time, not to
> > spend time.
> >
> > > Updating '/etc/default/zaptel'
> > > Generating '/etc/zaptel.conf'
> > > Generating '/etc/asterisk/zapata-channels.conf'
> > > Reconfiguring identified channels
> > >
> > > Zaptel Configuration
> > > ======================
> > >
> > >
> > > Channel map:
> > >
> > >
> > > 0 channels configured.
> > >
> > > ./genzaptelconf: line 653: /etc/init.d/asterisk:
> > No
> > > such file or directory
> > > Checking channels configured in Asterisk:
> > > ./genzaptelconf: line 665: asterisk: command not
> > found
> > >
> > > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >
> > > What may be the problem? Help me in this regard.
> > >
> > > Regards,
> > > Somesh S. Shanbhag
> > >
> > > --- Tzafrir Cohen <tzafrir at cohens.org.il> wrote:
> > >
> > > > On Sun, Sep 25, 2005 at 10:42:52PM -0700,
> somesh
> > s
> > > > wrote:
> > > > > Hi,
> > > > >
> > > > > Can you please give me some details about
> the
> > link
> > > > > you have sent? I am not aware of what it
> does?
> > > > >
> > > > > [http://tzafrir.org.il/genzaptelconf]
> > > >
> > > > It is a bash script for generating zaptel.conf
> > and
> > > > zapata.conf according
> > > > to the current settings.
> > > >
> > > > To use it:
> > > >
> > > > wget http://tzafrir.org.il/genzaptelconf
> > > > bash genzaptelconf -h # gives help
> > > >
> > > > Try -s and -v . -d is probably not recommended
> > if
> > > > you have more thn one
> > > > card, I figure.
> > > >
> > > >
> > > > >
> > > > > Regards,
> > > > > Somesh S. Shanbhag
> > > > >
> > > > > --- Tzafrir Cohen <tzafrir at cohens.org.il>
> > wrote:
> > > > >
> > > > > > On Fri, Sep 23, 2005 at 06:22:06AM -0700,
> > somesh
> > > > s
> > > > > > wrote:
> > > > > > > Hi Steve,
> > > > > > >
>
=== message truncated ===
__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com
------------------------------
Message: 21
Date: Tue, 27 Sep 2005 09:20:13 +0200
From: <f6hqz-m at hamwlan.net>
Subject: [Asterisk-Users] Termcap missing (compile error
[editline/libedit.a] Error 1)
To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
<asterisk-users at lists.digium.com>
Message-ID:
<!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAARuRp1ly/OEScRq8g2NJOvsKAAAAQ
AAAADegh96biaUqAq/V483P85gEAAAAA at hamwlan.net>
Content-Type: text/plain; charset="us-ascii"
Hello Gentlemen :-)
I am a little disapointed by an error occured during an update from 1.0.7 to
"Head" in a Debian "testing" distro.
The first error message happens by using the famous script from
http://www.szmidt.org/asterisk/asterisk-update.sh :
configure: error: termcap support not found
make: *** [editline/libedit.a] Erreur 1
ERROR! Compile exited with error.
Aborting script!
And, if I tempt to compile "manualy" with "make clean; make; make install",
I can see that at the end :
cd editline && unset CFLAGS LIBS && test -f config.h || ./configure
loading cache ./config.cache
checking for gcc... gcc
checking whether the C compiler (gcc ) works... yes
checking whether the C compiler (gcc ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking host system type... i686-pc-linux-gnu
cygwin detected
checking for a BSD compatible install... install
checking for ranlib... ranlib
checking for ar... /usr/bin/ar
checking for tgetent in -ltermcap... no
checking for tgetent in -ltinfo... no
checking for tgetent in -lcurses... no
checking for tgetent in -lncurses... no
configure: error: termcap support not found
make: *** [editline/libedit.a] Erreur 1
sarge:/usr/src/asterisk#
What occurs ? What I have missed ? Any idea to help me ?
What can I describe or search more for a best analyze ?
Many thanks in advance, guys !
Best Regards,
Francois BERGERET,
France.
------------------------------
Message: 22
Date: Tue, 27 Sep 2005 09:25:20 +0200
From: "Andreas Sikkema" <andreas.sikkema at bbned.nl>
Subject: RE: [Asterisk-Users] Removing "-" (Dash) from Dialed Numbers
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID:
<5B97FFB7F28E3E4294B049C968CBF47B5C99ED at SERVER-EX02A.INTERN.BBNED.NL>
Content-Type: text/plain; charset="iso-8859-1"
asterisk-users-bounces at lists.digium.com wrote:
>> I am trying to enable dial-by-email by using LDAPget to query
>> an Active Directory server. I've got it retrieving the phone
>> number fine. Unforunately, the numbers stored in active
>> directory are either in the format: (xxx) xxx-xxxx or
>> xxx-xxx-xxxx.
> Is there
>> any way to parse characters out of the dialed phone number so
>> that I only end up with digits (remove spaces, parenthesis and
>> dashes)? From there, my outbound routes can take care of
>> where to send the call.
> This would be darned easy to do with the AGI and a perl script.
>
> IE:
>
> exten => _X.,1,agi,fixnumbers|${MyNumber}
> exten => _X.,2,Dial(ZAP/g0/1${MyNumber})
>
> Then, in a perl script called "fixnumbers" and inside the agi-bin
> directory:
>
> ########## START CODE #############
> #!/usr/bin/perl -w
> use strict;
> use Asterisk::AGI;
> $AGI = new Asterisk::AGI;
> my %input = $AGI->ReadParse();
>
> my $number=$ARGV[0];
> $number=~s/-//g;
> $number=~s/ //g;
> $number=~s/\(//g;
> $number=~s/\)//g;
>
> print $AGI->set_variable('MyNumber',"$number");
>
> exit;
>
> ####### END CODE ########
Depending on how many calls per second you want to perform,
some dialplan magic might be cheaper than starting up a
perl process.
I'd write a diaplan macro for this. If the numbers are in a
fixed format (4th character is a -, 7th character is a -,
etc), then it's really simple.
Something like this:
exten => s,1,SetVar(strPart1 = ${myNumber:0:3}
exten => s,2,SetVar(strPart2 = ${myNumber:4:3}
exten => s,3,SetVar(strPart3 = ${myNumber:7:3}
exten => s,4,SetVar(myNumber = $strPart1$strPart2$strPart3
But I'm using quite an old Asterisk, so current syntax might
be a little different, but the Wiki suggests this still works.
--
Andreas Sikkema bbned NV
Van Vollenhovenstraat 3 3016 BE Rotterdam
t: +31 (0)10 2245544 f: +31 (0)10 413 65 45
------------------------------
Message: 23
Date: Tue, 27 Sep 2005 10:32:58 +0300
From: Tzafrir Cohen <tzafrir at cohens.org.il>
Subject: Re: [Asterisk-Users] Termcap missing (compile error
[editline/libedit.a] Error 1)
To: asterisk-users at lists.digium.com
Message-ID: <20050927073258.GS15036 at gadot.org.il>
Content-Type: text/plain; charset=us-ascii
On Tue, Sep 27, 2005 at 09:20:13AM +0200, f6hqz-m at hamwlan.net wrote:
> Hello Gentlemen :-)
>
> I am a little disapointed by an error occured during an update from 1.0.7
to
> "Head" in a Debian "testing" distro.
Start with defining a standard deb-src of Sarge (I think it is defined
by default. Maybe remmed-out) and then run:
apt-get install build-essential
apt-get build-dep asterisk
It should get you roughly the packages needed to build HEAD from source.
--
Tzafrir Cohen | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il | | a Mutt's
tzafrir at cohens.org.il | | best
ICQ# 16849755 | | friend
------------------------------
Message: 24
Date: Tue, 27 Sep 2005 09:35:45 +0200
From: "Sergio Serrano" <sergio.serrano at avanzada7.com>
Subject: RE: [Asterisk-Users] Termcap missing (compile
error[editline/libedit.a] Error 1)
To: <f6hqz-m at hamwlan.net>, "'Asterisk Users Mailing List -
Non-Commercial Discussion'" <asterisk-users at lists.digium.com>
Message-ID: <20050927073552.B7A833C617 at lists.digium.com>
Content-Type: text/plain; charset="us-ascii"
You must install libncurses5-dev
regards,
srsergio
-----Mensaje original-----
De: f6hqz-m at hamwlan.net [mailto:f6hqz-m at hamwlan.net]
Enviado el: martes, 27 de septiembre de 2005 9:20
Para: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Asunto: [Asterisk-Users] Termcap missing (compile error[editline/libedit.a]
Error 1)
Hello Gentlemen :-)
I am a little disapointed by an error occured during an update from 1.0.7 to
"Head" in a Debian "testing" distro.
The first error message happens by using the famous script from
http://www.szmidt.org/asterisk/asterisk-update.sh :
configure: error: termcap support not found
make: *** [editline/libedit.a] Erreur 1
ERROR! Compile exited with error.
Aborting script!
And, if I tempt to compile "manualy" with "make clean; make; make install",
I can see that at the end :
cd editline && unset CFLAGS LIBS && test -f config.h || ./configure loading
cache ./config.cache checking for gcc... gcc checking whether the C compiler
(gcc ) works... yes checking whether the C compiler (gcc ) is a
cross-compiler... no checking whether we are using GNU C... yes checking
whether gcc accepts -g... yes checking how to run the C preprocessor... gcc
-E checking host system type... i686-pc-linux-gnu cygwin detected checking
for a BSD compatible install... install checking for ranlib... ranlib
checking for ar... /usr/bin/ar checking for tgetent in -ltermcap... no
checking for tgetent in -ltinfo... no checking for tgetent in -lcurses... no
checking for tgetent in -lncurses... no
configure: error: termcap support not found
make: *** [editline/libedit.a] Erreur 1
sarge:/usr/src/asterisk#
What occurs ? What I have missed ? Any idea to help me ?
What can I describe or search more for a best analyze ?
Many thanks in advance, guys !
Best Regards,
Francois BERGERET,
France.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date: 23/09/2005
------------------------------
Message: 25
Date: Tue, 27 Sep 2005 16:36:21 +0900
From: Pikoro <webmaster at psphacks.net>
Subject: [Asterisk-Users] pbx_wilcalu.so: undefined symbol:
To: asterisk-users at lists.digium.com
Message-ID: <4338F675.9030702 at psphacks.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Anyone run into this? This is from the latest 1.2.0 beta1 tarball.
Got it all compiled, but this undefined symbol is stopping asterisk from
loading.
Can I savely bypass this module and if so, what does it actually do?
Cheers
------------------------------
Message: 26
Date: Tue, 27 Sep 2005 10:02:21 +0200
From: Hauke Zuehl <hzuehl at athene.dnsalias.org>
Subject: Re: [Asterisk-Users] Early Media in 180 Ringing
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Message-ID: <200509271002.21828.hzuehl at athene.dnsalias.org>
Content-Type: text/plain; charset="iso-8859-1"
Hi :)
Am Montag, 26. September 2005 19:48 schrieb Ronald Voermans:
> Hello,
>
> As you can see below, the SIP message from 10.254.254.1 (the PSTN
> Gateway) has SDP, while * (with 192.168.0.173) removes the SDP content.
>
> How can this be solved?
>
Well, I am not that expert but AFAIK your PSTN gateway should send a 183
(Session progress) than a simple 180.
Do you use Dial(SIP/blah|30|m(moh_class)) to start early media?
Regards,
Hauke
------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
End of Asterisk-Users Digest, Vol 14, Issue 161
***********************************************
More information about the asterisk-users
mailing list