[Asterisk-Users] IBM x306

[Marco Supino]

Only one PCI slot can hold the full size card like the TDM400P , the 
other slot has a smaller opening on the case.

Marco.


Alexander Lopez wrote:
> Can you try a different slot on the PCI bus??
>  
> 
> 
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com 
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>>Marco Supino
>>Sent: Saturday, September 24, 2005 8:51 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] IBM x306
>>
>>Hi,
>>
>>This is a little off-topic,but if someone has any info, it 
>>could help me a LOT!,
>>
>>I am building an asterisk pbx (1.0.9) on an IBM x306 SCSI 
>>machine,my problem is that the BIOS assigns the same IRQ to 
>>the SCSI controller, and the TDM400P, i have tried several 
>>options of making the bios change the IRQ, but it will always 
>>move them together, anyone with some info about my options ?
>>
>>Thanks,
>>
>>Marco.
>>
>>_______________________________________________
>>--Bandwidth and Colocation sponsored by Easynews.com --
>>
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>