[Asterisk-Users] zaphfc problem: overlapdial don't work after update bristuff

[Johann Steinwendtner]

I had the same problem. It seems that a fix into bristuff for .at
does not work very well.
I 've patched chan_zap.c

Best regards

Hans

old:
                            } else {
                            if (pri->nodetype == BRI_CPE) {
                            /* fix for .at p2p bri lines */
 
pri->pvts[chanpos]->exten[0] = 's';

new:

                            } else {
				if ((pri->nodetype == BRI_CPE) && (!pri->overlapdial)) {
		           /* fix for .at p2p bri lines */
						    pri->pvts[chanpos]->exten[0] = 's';
						

tuned at fan.priv.at schrieb:
> hello,
> 
> I have a asterisk box (Slackware 9.1.0, Linux 2.4.31) connected to a 
> Ericsson Businessphone PBX on the internal S0 bus with HFC-S card and 
> zaphfc driver - point2point mode -.
> 
> 
>   ---------
>   | TELCO |
>   |  BRI  |
>   ---------
>       |
>       | PBX external S0
>    --------
>    | PBX  |
>    --------
>       | PBX internal P2P S0 NT Mode
>       |
>       | HFC-S Card P2P TE Mode
>   ---------
>   |   *   |
>   |  BOX  |
>   ---------
> 
> Since nearly one year it runs Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b
> fine. after dialing the internal S0 number (61) I get overlapdial and
> dialtone.
> 
> [example dial the PBX S0 with Asterisk 1.0.2-BRIstuffed-0.2.0-RC2b]
>     -- Accepting AUTHENTICATED call from 192.168.255.1, requested format 
> = 8, actual format = 8
>     -- Executing Dial("IAX2/ogo at call_saar/1", "Zap/g1/61|60") in new stack
>     -- Called g1/61
> Sep 23 10:27:50 NOTICE[229390]: chan_zap.c:8725 pri_dchannel: SETUP_ACK  
> for 'Zap/1-1'
>     -- Accepting overlap call from '' to '<unspecified>' on channel 0/2, 
> span 1
>     -- Starting simple switch on 'Zap/2-1'
>                    ^^^^^^^^
>                             here I get a dialtone from PBX and I can dial
>                             start dialing for 8 seconds
> 
> for different reasons I tried to update on latest bristuff-0.2.0-RC8n.
> after update the zaphfc overlap dial don't work anymore.
> when I dial the S0 bus it jumps directly into 's' extension,
> which does not exisist in the context and I get 'no number' from PBX.
> 
> zapata.conf:
> ------------
> [channels]
> switchtype = euroisdn
> signalling = bri_cpe
> pridialplan=local
> echocancel=yes
> immediate=no
> overlapdial=yes
> group = 1
> faxdetect=both
> context=fromisdn
> channel => 1-2
> 
> zaptel.conf:
> ------------
> loadzone=nl
> defaultzone=nl
> span=1,1,3,ccs,ami
> bchan=1-2
> dchan=3
> 
> extension.conf:
> 
> [fromisdn]
> ; example dial to BRI on other location
> exten => _0.,1,Dial(IAX2/call_saar/${EXTEN}@intern,60)
> exten => _0.,2,Congestion
> exten => _0.,102,Hangup
> 
> 
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
>