[Asterisk-Users] Re: How can i call to a cellphone here in Mexico?

[Don Dawson]

Remember that 044 is dialed from Mexico land-line phones. Not used when dialing from outside.

  ----- Original Message ----- 
  From: Alchaemist 
  To: asterisk-users at lists.digium.com 
  Sent: Wednesday, September 21, 2005 5:01 PM
  Subject: [Asterisk-Users] Re: How can i call to a cellphone here in Mexico?


  Hi Claudio (Hola)

          The reason is surely that you have a conflict with the prefix commonly used in mexico for cell phones (044)
          You will have to review all your extensions.conf and related files, to make sure the calls are routed correctly.
          Regards!
  Alchaemist
    "Claudio Canseco" <claudio.canseco at gmail.com> wrote in message news:8c1b1bde05092113458b6621 at mail.gmail.com...
    Hi, thanks for your replay Alex:


    Right now a have an Asterisk server on a Dell Optiplex GX110 (PIII 666MHz, 320 RAM) with no soundcard.
    With an X100P clone card (an ambient modem).

    Everything looks good, I've been able to make local calls trough PSTN, IAX, SIP.
    I only have 1 POTS line, and 4 SIP softphones (X-lite) running all right.
    The only problem so far I have noticed (or realized of  :P), it is that i can make calls
    to cellularphone numbers, * tries to connect but i get redirected to the emergency service number 066.

    I don't think it is because of my dialplan, eventhough I tried several configurations. Anyways here is part of the dialplan
    where my softphones make calls:


      ;########################################
      ;#  Llamadas salientes  [outgoing]      #
      ;########################################

      [outgoing]
      include => toPSTN
      include => iaxtel
      include => fwd-iax

      ;########   -> PSTN ########

      [toPSTN]                         ; Permite hacer llamadas locales (7-digitos sin contar 9)
      ignorepat => 9

      exten => _92XXXXXX,1,NoOp("Call for "${EXTEN:1})
      exten => _92XXXXXX,2,Dial(Zap/1/${EXTEN:1})

      exten => _904466XXXXXXXX,1,NoOp("Call for "(${EXTEN:1})  ;Llamadas a Celular
      exten => _904466XXXXXXXX,2,Dial(Zap/1/ww${EXTEN:1})

      ;######## -> IAXTEL ########

      [iaxtel]
      exten => _1700XXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel )
      exten => _1888NXXXXXX,1,Dial( IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel )
      exten => _1877NXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel )
      exten => _1866NXXXXXX,1,Dial( IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel )
      exten => _1800NXXXXXX,1,Dial(IAX2/${cuenta}@iaxtel.com/${EXTEN}@iaxtel )

      ;########   -> FWD  ########

      [fwd-iax]
      exten => _3.,1,SetCallerId,${FWDCIDNAME}
      exten => _3.,2,Dial( IAX2/${FWDNUMBER}:${FWDPASSWORD}@iax2.fwdnet.net/${EXTEN:1},60,tr) 
      exten => _3.,3,Congestion



      ;#########################################
      ;#  Softphone x-lite                     #
      ;#########################################

      [x-lite]  ; Note: SIP extensions are defined here as "66" followed by any two digits
      include => default
      include => servicios
      include => outgoing

      exten => 6600,1,NoOp(Llamada saliente maneja IAX2)
      exten => 6600,2,Macro(dial,kano00,IAX2/kano00,20,tr)

      exten => _X,1,NoOp(Llamada saliente maneja SIP)
      exten => _X,2,Macro(dial,667${EXTEN},SIP/667${EXTEN},20,tr)


    All softphones working are SIP, and are directed to the [x-lite] context.

    This is my zapata.conf:

      [channels]
      language=es
      context=incoming
      signalling=fxs_ks.
      usecallerid=yes
      hidecallerid=no
      callwaiting=yes
      callwaitingcallerid=yes
      threewaycalling=yes
      transfer=yes
      cancallforward=yes
      callreturn=yes 

      echocancel=yes
      echocancelwhenbridged=yes
      echotraining=800
      rxgain=0.0
      txgain=25.0

      group=1
      pickupgroup=1
      immediate=yes
      musiconhold=default
      relaxdtmf=yes   ; Relajar el DTMF, poner si asterisk salta o duplica algún DTMF, 
        ; dando lugar a un número incorrecto.
      channel => 1

    And my simple configuration file, 
    zaptel.conf:
      loadzone=mx
      defaultzone=mx
      fxsks=1

    As you can see this aren't complicated configurations because i only have 1 X100P card, and I am currently using little extensions.

    Also, I am not using AMP but I'm thinking to installing it over my current installation. I installed asterisk and zaptel from instructions i got from several documentations sites (voip-info wiki, digium, etc). 

    Well, I hope this info can help to look down the problem. Thanks again,

    Regards,

    Claudio



----------------------------------------------------------------------------


    _______________________________________________
    --Bandwidth and Colocation sponsored by Easynews.com --

    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation sponsored by Easynews.com --

  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050921/03f51faf/attachment.htm