[Asterisk-Users] Fedora Core 4 not recognizing X100P cards

[Innocent Evil]

just an update for all curious folks

I just replaced my FXS card and everything is working great ..
I am running asterisk as non-root user.

Moreover, I couldn't figure it out how/why my FXS card got damaged.


Thanks,


> -----Original Message-----
> From: innocent.evil at inbox.com
> Sent: Wed, 14 Sep 2005 06:44:45 -0800
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Fedora Core 4 not recognizing X100P cards
>
> como'n folks..  ...
>
> >
> > Well, as I told earlier.. my asterisk was running great with one fxo
> and
> > one
> > fxs module of a TDM400P
> > All i tried last night to run asterisk with non-root
> > I must did something wrong while I was trying to do that
> >
> > FXO module on channel # 1
> > FXS module on channel # 4
> >
> > /etc/zaptel.conf
> > ---------------------
> > loadzone = us
> > defaultzone=us
> > fxoks=1
> > fxsks=4
> >
> > /etc/asterisk/zapata.conf
> > --------------------------------
> > signalling=fxo_ks
> > channel=1
> > signalling=fxs_ks
> > channel=4
> >
> > Did I made any mistake above?
> >
> > /etc/modprobe.conf
> > -------------------------
> > install wcfxo /sbin/modprobe --ignore-install wcfxo && /sbin/ztcfg
> > install wctdm /sbin/modprobe --ignore-install wctdm && /sbin/ztcfg
> > # there have more line in it.. i guess they are not important here
> > alias wcfxs wctdm
> >
> > /etc/rc.d/init.d/asterisk
> > -----------------------------
> > #important lines are below
> >   start)
> >         /sbin/modprobe wctdm
> >         daemon /usr/sbin/asterisk
> >
> >   stop)
> >         killproc asterisk
> >         /sbin/modprobe -r wctdm
> >
> > Here is the output of asterisk -vvvc
> > Sep 13 22:18:11 WARNING[3982]: chan_zap.c:887 zt_open: Unable to
> specify
> > channel 1: No such device
> > Sep 13 22:18:11 ERROR[3982]: chan_zap.c:6612 mkintf: Unable to open
> > channel
> > 1: No such device
> > here = 0, tmp->channel = 1, channel = 1
> > Sep 13 22:18:11 ERROR[3982]: chan_zap.c:9990 setup_zap: Unable to
> > register
> > channel '1'
> > Sep 13 22:18:11 WARNING[3982]: loader.c:403 __load_resource:
> chan_zap.so:
> > load_module failed, returning -1
> > Sep 13 22:18:11 WARNING[3982]: loader.c:543 load_modules: Loading
> module
> > chan_zap.so failed!
> >
> > see I have channel # 1
> > [root at asterisk ~]# ls -l /dev/zap/
> > total 0
> > crw-rw----  1 root asterisk 196,   1 Sep 13 22:20 1
> > crw-rw----  1 root asterisk 196,   2 Sep 13 22:20 2
> > crw-rw----  1 root asterisk 196,   3 Sep 13 22:20 3
> > crw-rw----  1 root asterisk 196,   4 Sep 13 22:20 4
> > crw-rw----  1 root asterisk 196, 254 Sep 13 22:20 channel
> > crw-rw----  1 root asterisk 196,   0 Sep 13 22:20 ctl
> > crw-rw----  1 root asterisk 196, 255 Sep 13 22:20 pseudo
> > crw-rw----  1 root asterisk 196, 253 Sep 13 22:20 timer
> >
> >
> > After all of this, if I comment out this from /etc/asterisk/zapata.conf
> > /etc/asterisk/zapata.conf
> > --------------------------------
> > ;signalling=fxo_ks
> > ;channel=1
> > signalling=fxs_ks
> > channel=4
> >
> > My asterisk run fine .. I just dont able to use my phone set attaced to
> > my
> > fxs module.
> > And all I had to do is .. forward all incoming call to my voicemail box
> > !!
> >
> > Should I consider my fxs card has burnt out !!
> >
> >
> > Thanks for reading.. hope someone will reply me to help.
> >
> > Thanks again,
> >
> >_______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users