[Asterisk-Users] Re: (no subject)

[Pablo Allietti]

On Wed, Sep 14, 2005 at 07:52:26PM +0200, Sander wrote:
> This is not a siemens pbx problem you set the
> pridialplan = to national and that adds a number to the outgoing call or
> something just use
> 
> 
> Pridialplan = local
> prilocaldialplan = local
> 
> and it should work


no uuuaaaaaaa the same problem.. ring in the extension 100. 

> 
> I tried to open the file kds again and now it showed me your configuration
> :) don't know why it did not show me before
> 
> Sander
> 
> -----Oorspronkelijk bericht-----
> Van: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] Namens Pablo Allietti
> Verzonden: woensdag 14 september 2005 17:31
> Aan: Asterisk Users Mailing List - Non-Commercial Discussion
> Onderwerp: [Asterisk-Users] Re: (no subject)
> 
> On Wed, Sep 14, 2005 at 10:22:10AM -0400, Matt Ryanczak wrote:
> 
> 
> ok. didnt work :( i thinks is a pbx problem. because E1 is incomming in the
> pbx. and all incomming calls go to 100.  thats the problem i will try to
> solve this.
> 
> 
> 
> > It could potentially be both. I would look at your extensions.conf 
> > first though. What does the extension entry for that context look like.
> > 
> > For instance I have an entry in my extensions.conf for dialing outside 
> > lines (outside being from asterisk to my PBX and then onto the outside 
> > world from there). The entry looks like this:
> > 
> > [to-analog]
> > exten => _9XXX.,1,Dial(ZAP/G1/${EXTEN}) exten => _9XXX.,2,Congestion 
> > exten => _9XXX.,103,Hangup
> > 
> > 
> > To dial a PBX extension the entry would look almost the same:
> > 
> > [to-pbx-extension]
> > exten => _9XXX.,1,Dial(ZAP/G1/${EXTEN:1}) exten => _9XXX.,2,Congestion 
> > exten => _9XXX.,103,Hangup
> > 
> > Hope this helps,
> > 
> > -Matt
> > 
> > On Wed, 2005-09-14 at 11:46 -0300, Pablo Allietti wrote:
> > > hi all, i have a box with a te110p and a pbx siemens... connect both 
> > > with a e1.
> > > with a xten soft i can call extensions numbers in my office example 
> > > 100
> > > 102 etc. but when i truy to go outside with the 9 before the call 
> > > rings in the first extensions (100). this is a asterisk problem? or 
> > > a pbx problem?
> > 
> > _______________________________________________
> > --Bandwidth and Colocation sponsored by Easynews.com --
> > 
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> ---end quoted text---
> 
> -- 
> 
> .-
> 
> Pablo Allietti
> LACNIC
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
---end quoted text---

-- 

.-

Pablo Allietti
LACNIC