[Asterisk-Users] Re: TE110P - Asterisk@Home Install Problems

[Pablo Allietti]

On Wed, Sep 14, 2005 at 10:45:36AM -0500, Robert Wagner wrote:

hi te110p is a et1 card. your sigfnalling is wrong i think
i have the same card and is work with this conf



/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16 
loadzone        = us
defaultzone     = us


/etc/asterisk/zapata.conf
;
; Zapata telephony interface
;
; Configuration file

[trunkgroups]

[channels]
context=from-pstn
rxwink=400              ; Atlas seems to use long (250ms) winks
relaxdtmf=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
;group=1
;callgroup=1
;pickupgroup=1



signalling=pri_net ; pri_cpe = PRI slave ; pri_net = PRI master

; national:       National ISDN 2 (default)
; dms100:         Nortel DMS100
; 4ess:           AT&T 4ESS
; 5ess:           Lucent 5ESS
; euroisdn:       EuroISDN
; ni1:            Old National ISDN 1


switchtype=national
echocancelwhenbridged=yes
echotraining=400 ; Asterisk trains to the beginning of the call, number
is in milliseconds
callerid=asreceived
group=1
;context=default ; Points to the default context of your extensions.conf
channel =>  1-15,17-31 ; Set this to 1-15,17-31 for E1


> 
>    I am having problems sending and receiving calls over the T1.  They
>    never seem to connect - outbound keeps ringing, inbound gets busy.
>    The T1 looks ok - no errors on the line.  Any ideas on what is wrong?
>    I have tried a variety of fxsks and fxoks configurations without
>    avail.  This is a single asterisk at home system with a single T1 card.
>    Robbed Bit T1 ami, d4.
> 
>    ------------------inbound call
>       --  Starting simple switch on 'Zap/7-1'
>        -- Starting simple switch on 'Zap/14-1'
>        -- Executing Playback("Zap/7-1", "vm-goodbye") in new stack
>        -- Playing 'vm-goodbye' (language 'en')
>        -- Executing Macro("Zap/7-1", "hangupcall") in new stack
>        -- Executing ResetCDR("Zap/7-1", "w") in new stack
>        -- Executing NoCDR("Zap/7-1", "") in new stack
>        -- Executing Wait("Zap/7-1", "5") in new stack
>        -- Executing Playback("Zap/14-1", "vm-goodbye") in new stack
>        -- Playing 'vm-goodbye' (language 'en')
>        -- Executing Hangup("Zap/7-1", "") in new stack
>      == Spawn extension (macro-hangupcall, s, 4) exited non-zero on
>    'Zap/7-1' in macro 'hangupcall'
>      == Spawn extension (default, s, 2) exited non-zero on 'Zap/7-1'
>        -- Hungup 'Zap/7-1'
>        -- Executing Macro("Zap/14-1", "hangupcall") in new stack
>        -- Executing ResetCDR("Zap/14-1", "w") in new stack
>        -- Executing NoCDR("Zap/14-1", "") in new stack
>        -- Executing Wait("Zap/14-1", "5") in new stack
>        -- Executing Hangup("Zap/14-1", "") in new stack
>      == Spawn extension (macro-hangupcall, s, 4) exited non-zero on
>    'Zap/14-1' in macro 'hangupcall'
>      == Spawn extension (default, s, 2) exited non-zero on 'Zap/14-1'
>        -- Hungup 'Zap/14-1'
>    ----------------------------
> 
>    ------------------outbound call
>        -- Executing SetVar("SIP/4901-cd04", "OUTNUM=mynum") in new stack
>        -- Executing Cut("SIP/4901-cd04", "custom=OUT_1|:|1") in new stack
>        -- Executing GotoIf("SIP/4901-cd04", "0?19") in new stack
>        -- Executing Dial("SIP/4901-cd04", "ZAP/g0/mynum") in new stack
>        -- Called g0/mynum
>        -- Zap/1-1 answered SIP/4901-cd04
>        -- Hungup 'Zap/1-1'
>    ---------------------------
> 
>    [zaptel.conf]
>    span=1,1,0,d4,ami # have tried with 1,0,0 - same problem
>    fxsks=1-24
>    loadzone = us
>    defaultzone=us
> 
>    [zapata.conf]
>    [channels]
>    signalling=fxs_ks
>    group=0
>    ;context=incoming
>    channel=>1-24
>    echocancelwhenbridged=yes
>    echotraining=400
>    context=default
>    faxdetect=incoming
> 
>    ;Include genzaptelconf configs
>    #include zapata-auto.conf
> 
>    ;Include AMP configs
>    #include zapata_additional.conf

> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
---end quoted text---

-- 

.-

Pablo Allietti
LACNIC