[Asterisk-Users] RxFAX

Rich Adamson radamson at routers.com
Mon Sep 12 06:41:25 MST 2005


It is highly unlikely you will get this to work correctly with an X100P
or TDM card due to pci bus issues and missed frames. See the many many 
posts relative to this over the last six months or so.

------------------------
> Does anyone have any ideas on why I can fax out using TxFax fine but I can't receive?  The 
system detects a fax and&
> 
>     -- Executing RxFAX("Zap/1-1", "/var/spool/asterisk/fax/1124786077.0.tif|debug") in new 
stack
> Slow carrier up
> Slow carrier down
> Changed from phase 1 to 4
> DIS:
>   Prefer 256 octet blocks
>   Can receive fax
>   Supported data signalling rates: V.27ter and V.29
>   R8x7.7lines/mm and/or 200x200pels/25.4mm
>   2D coding
>   Scan line length: 215mm
>   Recording length: Unlimited
>   Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
>   R8x15.4lines/mm
>   Minimum scan line time for higher resolutions: T15.4 = T7.7
>   North American Letter (215.9mm x 279.4mm)
>   North American Legal (215.9mm x 355.6mm)
> >>> DIS: 80 00 ce f4 80 80 81 80 80 80 18
> HDLC underflow in state 9
> Changed from phase 4 to 3
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> Slow carrier up
> Slow carrier down
> 
> Is what I get.  I am using 1.0.9 and SpanDSP .18 with a 100XP card.
> 
> Regards
> 
> Lee
> 
> ###########################################
> 
> This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
> For more information, connect to http://www.f-secure.com/
---------------End of Original Message-----------------





More information about the asterisk-users mailing list