[Asterisk-Users] TE406p no interrupts

[Jason Kim]

I modified wct4xxp.c and make clean; make linux26;
make install; reboot;
But the system is not rebooted.
Because the system is in remote office I will check it
next morning.
Could you let me know your linux version, * version
and motherboard?

Thank you Boris.

--- Boris Bakchiev <boris at jildent.com.au> wrote:

> Well.
> Try this please (but only if you're running on the
> latest sources).
> Open wct4xxp.c sources and search for
> pci_module_init
> Replace it with pci_register_driver
> So the line should read:
> res = pci_register_driver(&t4_driver);
> 
> That allows you to get the card working on 2.6.13 in
> almost exactly the
> same setup as yours.
> 
> One weird thing though. Do no use insmod
> ./wct4xxp.ko from zaptel
> directory as it will not work. Do a proper make
> install and then
> modprobe.
> 
> 
> This is just part of the fixes you might need to do.
> If you encounter a problem after span
> reconfiguration (ztcfg) let me
> know.
> 
> If you get stuck.. let me know.
> 
> Regards
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On
> Behalf Of Jason Kim
> Sent: Sunday, September 11, 2005 8:14 PM
> To: asterisk-users at lists.digium.com
> Subject: RE: [Asterisk-Users] TE406p no interrupts
> 
> I'm using FC3.
> 
> uname -a
> -----------------------------------------
> Linux billitipcc 2.6.9-1.667smp #1 SMP Tue Nov 2
> 15:09:11 EST 2004 x86_64 x86_64 x86_64 GNU/Linux
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com
> --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com