[Asterisk-Users] Solution for 12 to 16 FXO to asterisk connection

[Damon Estep]

500-600 is more typical these days depending on where you are, but
insist on PRI unless the service central office can not provide it.

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ben Brown
Sent: Thursday, September 08, 2005 9:41 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Solution for 12 to 16 FXO to asterisk
connection

 

Is this standard in the industry? My local telco in the US wants
$1050/month for T1 (not PRI!) I can buy 24 POTS lines for $840/month.
Gotta love small towns!

BEN

Sean Cook wrote: 

Not sure about where you are but 16 pots lines generally run about
$25-$30 /
month = $480/month.  For about $400/month I can get a PRI (23+1) and go
straight into a TE100.
 
Just a thought.
 
Sean
 
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Erick
Perez
Sent: Thursday, September 08, 2005 11:04 PM
To: Damon Estep
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Solution for 12 to 16 FXO to asterisk
connection
 
cant find a cisco one so far.
 
So what i need is a voip gateway?
i found the octtel sp1632 for about USD.1500
http://www.octtel.com.tw/eng/product_1632_2.php
 
so i configure the equipment to register with the asterisk? as sip? or
some other thing? it will only be used to make outgoing calls, the
config is like this
 
nortel (12 port pstn card)----->(device with
16fxo)----->asterisk----->voip_provider
 
no chance to use an e1/t1 on the nortel.
 
On 9/8/05, Damon Estep <damon at suburbanbroadband.net>
<mailto:damon at suburbanbroadband.net>  wrote:
  

	How about a used cisco iad2400 with a 16fxo module? Check ebay -
no t1
	card required. Probably $1000
	 
	    

		-----Original Message-----
		From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-
		bounces at lists.digium.com] On Behalf Of Erick Perez
		Sent: Thursday, September 08, 2005 8:27 PM
		To: asterisk-users at lists.digium.com
		Subject: [Asterisk-Users] Solution for 12 to 16 FXO to
asterisk
		      

	connection
	    

		Hi, today a customer asked how to use asterisk with 12
to 16 FXO
		ports. I can use a channel bank with 16 FXO ports and
connect the
		channel bank with a T1 cable to a T1 card in the
Asterisk Server.
		Asterisk will then send the calls to the Voip provider
over the
		internet.
		 
		However a 16 fxo port channel bank is about USD 1500 + a
t1 card USD
		500 + a USD 1000 computer = 3 thousand us dollars + my
installation
		fees (life isn't free).
		 
		Sounds expensive for such a small install.
		 
		Suggestions?
		 
		 
		--
		 
		-------------------------------------------
		Erick Perez
		Linux User 376588
		http://counter.li.org/  (Get counted!!!)
		Panama, Republic of Panama
		_______________________________________________
		--Bandwidth and Colocation sponsored by Easynews.com --
		 
		Asterisk-Users mailing list
		Asterisk-Users at lists.digium.com
		http://lists.digium.com/mailman/listinfo/asterisk-users
		To UNSUBSCRIBE or update options visit:
	
http://lists.digium.com/mailman/listinfo/asterisk-users
		      

 
 
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050908/0b53e285/attachment.htm