[Asterisk-Users] pri gateway

[altus]

what about a copy of your zapata.conf and zaptel.conf,what color is the
leds

On Thu, 2005-09-08 at 12:42 +0300, Baris Simsek wrote:
> hello,
> 
> i installed an asterisk as  a pri gateway. Everything is okay. 
> /etc/init.d/zaptel starts successfull with wct4xxp module. 
> /etc/init.d/asterisk starts also successfully. I tested my pri cable and 
> it works. But still my span isn't up. I don't see any error. Do you have 
> any idea? What else i should check? Thanks.
> 
> My card is 4 span Wildcard TE410P 
> <http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P>
> 
> # lsmod
> wct4xxp               106688  62
> zaptel                226820  129 wct4xxp
> 
> # asterisk -r
> gw*CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, In Alarm, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
-- 

Thanks
Altus Snyman
Stormcorp Network Solutions
+27 11 8071141 exten 301