[Asterisk-Users] Asterisk as SIP/H.323 Signalling Gateway

[BJ Weschke]

 Yes. You can use the openh323 toolkit along with the ast-oh323 channel to 
do this or you can also try and use the more recent native h323 channel 
driver provided by Digium. 
  My experience with doing this comes from doing it with the openh323 
toolkit with the ast-oh323 channel and it does work well. 

 On 06-Sep-2005 15:47:46 CEDT, Joerg Furrer <Joerg.Furrer at ascom.ch> wrote: 
> 
> 
> 
> 
> 
> Hi,
> 
> I am wondering whether I can use Asterisk as SIP/H.323 Signalling Gateway.
> The setup I envisage looks as follows:
> 
> 
> H.323 end-point ---------(ETH)--------- Asterisk
> ---------(ETH)--------- SIP Proxy/Registrar ---------(ETH)---------
> SIP end-point
> 
> (ETH: Ethernet)
> 
> In principle, Asterisk would just be used to integrate H.323 end-points
> into a fully SIP-based core-network. Hence, there will for sure be another
> SIP Proxy/Registrar to which all SIP end-points register.
> 
> - Any experience with or suggestions for such a setup?
> - How would the media stream be handled?
> 
> Thanks,
> Joerg
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050906/514f913c/attachment.htm