[Asterisk-Users] chan_capi hfcpci mISDN linux 2.6.12 not working

[Konrads Smelkovs]

Here you go, eagerly awaiting comments:

    -- Executing SetCallerID("SIP/xlite1-e0a7", "0") in new stack
    -- Executing Dial("SIP/xlite1-e0a7", "CAPI/hfcpci/17/b") in new stack
       > data = hfcpci/17/b
       > parsed dialstring: 'hfcpci' '17' 'b'
       > capi request for interface 'hfcpci'
       > parsed dialstring: 'hfcpci' '17' 'b'
  == hfcpci: Call CAPI/hfcpci/17-0 with B3  (pres=0x00, ton=0x00)
CONNECT_CONF ID=001 #0x0003 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Info                            = 0x0

    -- hfcpci: received CONNECT_CONF PLCI = 0x101
CONNECT_REQ ID=001 #0x0003 LEN=0044
  Controller/PLCI/NCCI            = 0x1
  CIPValue                        = 0x1
  CalledPartyNumber               = <80>17
  CallingPartyNumber              = <00 80>0
  CalledPartySubaddress           = default
  CallingPartySubaddress          = default
  BProtocol
   B1protocol                     = 0x1
   B2protocol                     = 0x1
   B3protocol                     = 0x0
   B1configuration                = default
   B2configuration                = default
   B3configuration                = default
  BC                              = default
  LLC                             = default
  HLC                             = default
  AdditionalInfo
   BChannelinformation            = <00 00>
   Keypadfacility                 = default
   Useruserdata                   = default
   Facilitydataarray              = default

    -- Called hfcpci/17/b
INFO_IND ID=001 #0x0001 LEN=0017
  Controller/PLCI/NCCI            = 0x101
  InfoNumber                      = 0x8
  InfoElement                     = <81 81>

INFO_RESP ID=001 #0x0001 LEN=0012
  Controller/PLCI/NCCI            = 0x101
    -- hfcpci: info element CAUSE 81 81
DISCONNECT_IND ID=001 #0x0002 LEN=0014
  Controller/PLCI/NCCI            = 0x101
DISCONNECT_IND ID=001 #0x0002 LEN=0014
  Controller/PLCI/NCCI            = 0x101
  Reason                          = 0x3481

DISCONNECT_RESP ID=001 #0x0002 LEN=0012
  Controller/PLCI/NCCI            = 0x101

       > CAPI INFO 0x3481: Unallocated (unassigned) number
  == hfcpci: CAPI Hangingup
  == hfcpci: Interface cleanup PLCI=0x101
  == No one is available to answer at this time (1:0/0/0)
  == Auto fallthrough, channel 'SIP/xlite1-e0a7' status is 'NOANSWER'



On 04/09/05, Armin Schindler <armin at melware.de> wrote:
> This is not enough to see the problem.
> Use verbose level 5 (-vvvvv)
> and use 'capi debug'
> 
> Armin
> 
> On Sun, 4 Sep 2005, Konrads Smelkovs wrote:
> > See if this helps... , i ran asterisk with -vvvgc
> >
> > CAPI Debugging Enabled
> >     -- Executing SetCallerID("SIP/xlite1-1be2", "0") in new stack
> >     -- Executing Dial("SIP/xlite1-1be2", "CAPI/hfcpci/17/b") in new stack
> >        > data = hfcpci/17/b
> >        > capi request for interface 'hfcpci'
> >   == hfcpci: Call CAPI/hfcpci/17-1 with B3  (pres=0x00, ton=0x00)
> >     -- hfcpci: received CONNECT_CONF PLCI = 0x101
> >     -- Called hfcpci/17/b
> >   == hfcpci: Interface cleanup PLCI=0x101
> >   == No one is available to answer at this time (1:0/0/0)
> >   == Auto fallthrough, channel 'SIP/xlite1-1be2' status is 'NOANSWER'
> >
> > Maybe there is something more I could look for?
> > On 02/09/05, Armin Schindler <armin at melware.de> wrote:
> > > On Fri, 2 Sep 2005, Konrads Smelkovs wrote:
> > > > Hello,
> > > > These are error messages I get when I try to call a number over CAPI channel.
> > > >
> > > >     -- Executing SetCallerID("SIP/xlite1-3b80", "0") in new stack
> > > >     -- Executing Dial("SIP/xlite1-3b80", "CAPI/hfcpci/b17") in new stack
> > > >        > data = hfcpci/b17
> > > >        > capi request for interface 'hfcpci'
> > > >   == hfcpci: Call CAPI/hfcpci/b17-1   (pres=0x00, ton=0x00)
> > > >     -- hfcpci: received CONNECT_CONF PLCI = 0x201
> > > >     -- Called hfcpci/b17
> > > >   == hfcpci: Interface cleanup PLCI=0x201
> > > >   == No one is available to answer at this time (1:0/0/0)
> > > >   == Auto fallthrough, channel 'SIP/xlite1-3b80' status is 'NOANSWER'
> > > >
> > > >
> > > > mISDNUser test tools show ISDN line working (testcon).
> > > >
> > > > capi info shows that 2 B channels are available
> > > > capiinfo utility also dumps meaningful information - indicating that
> > > > it indeed recognises the card.
> > >
> > > To see more, you may want to increase verbosity level and enable
> > > 'capi debug'.
> > >
> > > Anyway, if you are using CVS version of chan_capi, your dialstring is not
> > > correct. The option for earlyb3 'b' may not be part of the called number any
> > > more. Option are added after the called id and an additional '/'.
> > > Your dial command should look like this:
> > >  Dial(CAPI/hfcpci/17/b)
> > >
> > > > chan_capi version - CVS as of Sep 2, 2005 from chan-capi.sf.net
> > > > I read comments on voip-info about 2.6.12 kernel breaking something,
> > > > but the patch was for capi 0.3.5, not sure it applies...
> > >
> > > No, this is obsolete for chan_capi on sourceforge. No patches are needed.
> > >
> > > Armin
> > >
> > >
> >
> >
> > --
> > Konrads Smelkovs
> > Applied IT sorcery.
> >
> 


-- 
Konrads Smelkovs
Applied IT sorcery.