[Asterisk-Users] hints and polycom IP 300 phones

[Adam Goryachev]

Hi all,

I've just updated to current CVS, and have 2 polycom IP phones, one is a
IP600 and the other is a IP300. The IP600 shows the status of the IP300
and a ZAP line quite nicely, but the IP300 won't show the status of the
IP600....

Is there any additional debug apart from "show hints" to see why this
might not be working ??
    -= Registered Asterisk Dial Plan Hints =-
   655                 : SIP/gs102_1           State  0 Watchers  0
   605                 : Zap/127               State  0 Watchers  3
   604                 : SIP/ata186_2          State  0 Watchers  0
   603                 : SIP/ata186_1          State  0 Watchers  0
   602                 : Zap/129               State  0 Watchers  0
   601                 : SIP/polycom_b         State  0 Watchers  1
   600                 : SIP/polycom_a         State  1 Watchers  2

The IP600 is watching 605 and 600 and working nicely for both, the IP300
is watching 601, but isn't working....

Has anyone got a IP300 phone to display the status ?? Any suggestions
for things to look at/etc ??

PS, of course, the current state is that 600 is off-hook and all others
are on-hook.

Regards,
Adam

-- 
 -- 
Adam Goryachev
Website Managers
Ph:  +61 2 8304 0000                        adam at websitemanagers.com.au
Fax: +61 2 8304 0001                        www.websitemanagers.com.au