[Asterisk-Users] newbie install problem. And I alreadysearchedeverywhere!

[Jeroen Baten]

Op zondag 4 september 2005 09:07, schreef Jeroen Baten:
> Op zondag 4 september 2005 00:21, schreef brett at websmyths.com:
> > Ok - what the heck is this?--------------------v
> > Dial("SIP/4001-2fea", "Zap/2/<mycellphonenumber}")
> >
> > I've never seen a } used in a dial statement...
>
> sorry, one } to many. in extensions it reads:
> exten => _97.,1,Dial(Zap/2/${EXTEN:2})
>
> still no joy though. Even changed the timeout:
>
>  Executing Dial("SIP/4001-b455", "Zap/2/456343|15") in new stack
>     -- Called 2/456343
>     -- Channel 0/2, span 1 got hangup
>     -- Hungup 'Zap/2-1'
>   == No one is available to answer at this time

Now with debug info:

*CLI> bri debug span 1
Enabled debugging on span 1
*CLI>
    -- Executing Dial("SIP/4001-923e", "Zap/g1/463665") in new stack
-- Making new call for cr 133
> Protocol Discriminator: Q.931 (8)  len=36
> Call Ref: len= 1 (reference 5/0x5) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: 
Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode 
(16)
>                              Ext: 1  User information layer 1: A-Law (35)
> [18 01 89]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Exclusive 
Dchan: 0
>                        ChanSel: B1 channel
                         ]
> [28 04 34 30 30 31]
> Display (len= 4) [ 4001 ]
> [6c 06 21 81 34 30 30 31]
> Calling Number (len= 8) [ Ext: 0  TON: National Number (2)  NPI: 
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user number 
passed network screening (1) '4001' ]
> [70 07 a1 34 36 33 36 36 35]
> Called Number (len= 9) [ Ext: 1  TON: National Number (2)  NPI: 
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '463665' ]
> [a1]
> Sending Complete (len= 1)
    -- Called g1/463665
No response to SETUP message
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Initiated, peerstate 
Overlap sending
    -- Channel 0/1, span 1 got hangup
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Call Initiated, peerstate 
Overlap sending
    -- Hungup 'Zap/1-1'
  == No one is available to answer at this time
Sep  4 09:20:28 NOTICE[1119251376]: rtp.c:429 ast_rtp_read: RTP: Received 
packet with bad UDP checksum
Sep  4 09:20:28 WARNING[1119251376]: pbx.c:1924 ast_pbx_run: Timeout, but no 
rule 't' in context 'default'

*CLI>


-- 
  Jeroen Baten            | EMAIL :  JBATEN at I2RS.NL
 ____  _  __              | web   :  www.i2rs.nl
  |  )|_)(_               | tel   :  +31 (0)499 477 688
 _|_/_| \__)              | fax   :  +31 (0)499 476 804
Roerlaan 36, 5691 HJ, Son, the Netherlands