[Asterisk-Users] TE406P seg fault on Stable

[Matt Florell]

The issue wasn't with the zaptel drivers, it was with the Asterisk code. In 
asterisk 1.0.9 it would not recognize the card and the spans never got out 
of red alarm. In cvs v1.0 the card loaded fine but when asterisk started up 
the first time it would seg fault with the error mentioned above, then I 
could start it a second time, but with in a few minutes of calls it would 
seg fault again. When I looked at the code for dsp.c in cvs v1.0 and v1.2 I 
noticed many differences and I'm really not familiar enough with that bunch 
of the code base to try to fix it myself.

Another note, this exact machine with a v1 TE405P three days ago worked just 
fine with the exact same settings under asterisk 1.0.9

MATT---

On 9/2/05, Kevin P. Fleming <kpfleming at digium.com> wrote:
> 
> Matt Florell wrote:
> > I have resolved my manager API issues with 1.2 beta1 and used the system 
> for
> > about 14000 calls today with no major problems. After talking to Digium
> > support staff I learned that they are not backporting a lot of the
> > optimizations for this card to the v1.0 tree anyway, so CVS_HEAD and
> > 1.2b1are the only options.
> 
> That is not true; the CVS HEAD and CVS v1-0 drivers for the TE4XX cards
> are identical, and will be kept that way. Please email me off-list to
> let me know who told you that.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com <http://Easynews.com>--
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050902/d0209f7e/attachment.htm