[Asterisk-Users] ztcfg problem

[Tzafrir Cohen]

On Thu, Sep 01, 2005 at 06:47:10PM +0200, Giordano Grandis wrote:
> Hi all,
> 
> I'm installing two HFC pci card (both in TE mode), I don't have problem
> when load module, but whrn I give "ztcfg -vv", I see 6 the six channels
> that I configured, then my computer hang and I have to reboot it. (I'm
> using a VIA Epia-M 1000 with Via C3 processor)

When exactly does it hang?

What is your zapata.conf?

Do you run it from the console? if so: do you see an oops trace?

Is the system totally hung, or can you still get useful information from
alt-sysrq-p and such?

> 
>  
> 
> root at test:~# modprobe zaptel
> 
> root at test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o 

And which version of zaptel? And linux?

> 
> root at test:~# ztcfg -vv
> 
>  
> 
> Zaptel Configuration
> 
> ======================
> 
>  
> 
> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> 
> SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> 
>  
> 
> Channel map:
> 
>  
> 
> Channel 01: Individual Clear channel (Default) (Slaves: 01)
> 
> Channel 02: Individual Clear channel (Default) (Slaves: 02)
> 
> Channel 03: D-channel (Default) (Slaves: 03)
> 
> Channel 04: Individual Clear channel (Default) (Slaves: 04)
> 
> Channel 05: Individual Clear channel (Default) (Slaves: 05)
> 
> Channel 06: D-channel (Default) (Slaves: 06)
> 
>  
> 
> 6 channels configured.
>

-- 
Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
http://tzafrir.org.il |                           | a Mutt's  
tzafrir at cohens.org.il |                           |  best
ICQ# 16849755         |                           | friend