[Asterisk-Users] SPA3000 as trunk - no caller ID

[Kerry Garrison]

Here is my version

Software Version: 3.1.5(GWb) Hardware Version: 2.0.1(42a8)  

I had mentioned this before, I am downloading 3.1.7 right now.
-Kerry


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of John Daragon
Sent: Thursday, October 27, 2005 3:50 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [Asterisk-Users] SPA3000 as trunk - no caller ID

Kerry Garrison wrote:
> During a PSTN call the status screen correctly displays the caller ID 
> information.

Well, if the SPA-3000 is picking up the CID, and PSTN CID as VOIP CID is
set, and the caller ID isn't being passed to Asterisk, it looks as if the
SIP INVITE is being passed to Asterisk before the CID has been detected. But
you've obviously thought of that - hence the delay...

It may be worth firing up ethereal to check that the CID really isn't in the
INVITE.

Are you using version 3.1.7 of the Sipura firmware?

jd

-- 

John Daragon                                          john at argv.co.uk
argv[0] limited
Lambs Lawn Cottage,  Staple Fitzpaine,  Taunton,  TA3 5SL,  UK
v +44 (0) 1460 234068   f +44 (0) 1460 234069   m +44 (0) 7836 576127
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users