[Asterisk-Users] Sipura SPA-3000 and Gigaset DECT phone: no ring

[Dave Cotton]

On Tue, 2005-10-25 at 21:27 +0200, Louis-David Mitterrand wrote:
> Hi,
> 
> I'm trying to get a SPA-3000 to work with a Siemens Gigaset 3010 DECT
> (cordless) phone. I tried every localization scheme I could find on the
> Net, including the settings recommended by the Voxilla wizard. 
> 
> This Gigaset works fine and rings when plugged directly into the telco's
> analog phone line. However it is impossible to have it ring when plugged
> into the SPA-3000's fxs port. I made sure the incoming call is actually
> signalling by taking the phone off hook and connecting the call.
> 
> So my problem seems to be only one of properly configuring the SPA-3000
> for french analog line standards or taking into accound the Gigaset
> peculiarities.
> 
> I'd welcome any suggestions, thanks in advance,

I only just got a SPA3000 today so I haven't tried it yet but I did have
lots of problems with the Gigaset 4010 on a HT286. It would only ring
once whatever settings I used. Cheaper versions 100/3000 worked OK.

I'll try my 4010/SPA3000 later.
-- 
Dave Cotton <dcotton at linuxautrement.com>