[Asterisk-Users] Siemens HI-path to ASTERISK

[huelbe_garcia at fastimap.com]

Yes, for sure, it works. With TE110P from Digium using E1/ISDN/Pri 
signalling.

By heart, I remember the following:

1. Configure Siemens E1 port as "station" and Asterisk as "Pri_Net" (or 
Central Office).

2. At Siemens, set the E1 port as "S2 Point-to-Point net line without CRC4" 
or something like this.

3. At Asterisk, put these lines (/etc/zaptel.conf):
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31

You have to study the rest of * conf file, but these ones are the important 
ones.

Regards,

--hg

----- Original Message ----- 
From: "Pablo Allietti" <pablo at lacnic.net>
To: <asterisk-users at lists.digium.com>
Sent: Monday, October 24, 2005 6:55 PM
Subject: [Asterisk-Users] Siemens HI-path to ASTERISK


> anybody can connect a Siemens HI-PATH to ASterisk via e1 ?
>
> i need your help please.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>