[Asterisk-Users] PA168S/AT320P

Kanuri, Seshu (Company IT) Seshu.Kanuri at morganstanley.com
Thu Oct 13 08:45:36 MST 2005


have you configured the STUN server on the phone to any one of the
available stun servers like stun.xten.net?


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of FaberK
Sent: Thursday, October 13, 2005 10:40 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] PA168S/AT320P

Hi,
thanks to reply:
1)SIP
2)yes. I've used the original 1.46 for SIP protocol Also your solution
do not work.
Are 2 days that I'm trying configurations and googling for this problem,
but nothing!
Always: "LOG ON FAILED"
I've saw about problems with this phone, but my hope was that with the
new firmware something could be solved.

Thanks again.

2005/10/13, Kanuri, Seshu (Company IT) <Seshu.Kanuri at morganstanley.com>:
> 1)What is the protocol you are using? SIP or IAX2?
> 2)Have you applied the correct firmware to the Phone?
>
> Pa168 phones are falwless when connecting to Asterisk.
>
> Start the configuration as asimple entry as under.
>
> I have added Port address and allowed codecs in the config below:
>
> [221]
> type=friend
> username=221
> secret=secret
> context=local
> host=dynamic
> dtmfmode=rfc2833
> nat=yes
> Port=5060
> Disallow=all
> Allow=g729
> Allow=ulaw
> Allow=gsm
>
> Seshu Kanuri
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of FaberK
> Sent: Thursday, October 13, 2005 9:35 AM
> To: Asterisk-Users at lists.digium.com
> Subject: [Asterisk-Users] PA168S/AT320P
>
> Hi all!
> I've got a problem with thia PA168S/AT320P telephone.
> I got 2 servers: one with SER and the other with Asterisk.
> All users are on SER and Asterisk is the gateway/voicemail.
> In these days I'm starting some tests using Asterisk accounts users.
> With this PA168S/AT320P, if I use it with a user from SER, it's ok but

> I can forget to use it with Asterisk users!!!
> I've also updated the firware at the 1.46 released the october 10th, 
> but nothing changed.
> These are my user settings:
> ----
> [221]
> type=friend
> username=221
> secret=secret
> host=dynamic
> canreinvite=yes
> dtmfmode=rfc2833
> nat=yes
> context=local
> mailbox=221 at local
> callerid="221" <221>
> accountcode=221
> qualify=yes
> ----
> Any ideas?
>
> Thanks to all.
> --
> .:FaberK:.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> --------------------------------------------------------
>
> NOTICE: If received in error, please destroy and notify sender.
Sender does not waive confidentiality or privilege, and use is
prohibited.
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>


--
.:FaberK:.
_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
--------------------------------------------------------

NOTICE: If received in error, please destroy and notify sender.  Sender does not waive confidentiality or privilege, and use is prohibited.



More information about the asterisk-users mailing list