[Asterisk-Users] Polycom: Button Remapping, HELP!

[Andy Goss]

It is on page 22 and 23 in my admin guide.

Andy

--
H. Andy Goss
Network Engineer
Network Advocates Inc.
Main: 502.412.1050
DID: 502.992.5933
Mobile: 502.387.8216
agoss at ntad.com
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Matthew T. O'Connor
> Sent: Wednesday, October 12, 2005 2:38 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Polycom: Button Remapping, HELP!
> 
> While I don't have it working yet, I think I have it figured out.  I
> have to add <keys /> entries to my sip.conf  Based on your example I
was
> able to find the relevant info in the Polycom SIP 1.5 Admin Guide
> section 4.6.1.15.
> 
> My next question, which I haven't found in the admin guide (at least
not
> yet) is where to you get a list of the buttons and their respective
> numbers?
> 
> Thanks again,
> 
> Matthew
> 
> 
> Mojo with Horan & Company, LLC wrote:
> > Do you already have an <ipmid></ipmid> block in your sip.cfg?  add
the
> > <keys ... /> in there:
> > Try putting:
> > <ipmid>
> >   ...
> >   ...
> >   <keys key.IP_500.31.function.prim="SpeedDial"
> > key.IP_500.31.subPoint.prim="3"/>
> > </ipmid>
> >
> > Moj
> >
> > Matthew T. O'Connor wrote:
> >> Ok, that would be helpful for me with some other problems, however
I
> >> don't see "<keys" anywhere in my sip.conf or my phoneXX.conf files.
> >> I'm using the 1.5.2 Sip firmware the the conf files that came with
> >> that, so I don't have an ipmid.cfg file.  Is this something I can
> >> just add to my sip.conf?
> >>
> >> Anyone out there any suggestions on how to do the speed dial
"in-call"?
> >>
> >> Thanks,
> >>
> >> Matt
> >>
> >>
> >>
> >> Mojo with Horan & Company, LLC wrote:
> >>
> >>> Matthew, when I tried this, I couldn't get the soundpoints to dial
> >>> in-call.  They thought there were picking up a new line for a new
> call.
> >>>
> >>> I created a speed-dial entry (in MACADDRESS-directory.xml,
> >>> "<item><fn>Park</fn><ct>#70#</ct><sd>3</sd></item>") and then in
> >>> ipmid.cfg:
> >>> <keys key.IP_500.31.function.prim="SpeedDial"
> >>> key.IP_500.31.subPoint.prim="3"/>
> >>>
> >>> This tells the phone to run Speed Dial 3 whenever the Services
> >>> button (button #31 on a 500/501) is pressed.  I hope someone can
> >>> help us configure them now to dial these digits in-call...
> >>>
> >>> Mojo
> >>>
> >>> Matthew T. O'Connor wrote:
> >>>
> >>>> I need to find a way to have the Polycom phones automatically
park
> >>>> calls.  Right now my users hit #70# (I know the last # is
optional
> >>>> but it speeds it up.) to park a call.  Personally I think this is
> >>>> easy, but my users would like one button to do this for them.
The
> >>>> Polycom has buttons we don't need (Transfer & Services), it would
> >>>> be nice if I could remap one of those buttons to dial #70#.  Or
if
> >>>> I could add a soft button during a call that would work too.
> >>>>
> >>>> Anyone have any suggestions on how to do this?
> >>>>
> >>>> Thanks much,
> >>>>
> >>>> Matthew O'Connor
> >>>>
> >>>> _______________________________________________
> >>>> --Bandwidth and Colocation sponsored by Easynews.com --
> >>>>
> >>>> Asterisk-Users mailing list
> >>>> Asterisk-Users at lists.digium.com
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>> To UNSUBSCRIBE or update options visit:
> >>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>>
> >>>
> >>
> >> _______________________________________________
> >> --Bandwidth and Colocation sponsored by Easynews.com --
> >>
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >>    http://lists.digium.com/mailman/listinfo/asterisk-users
> >>
> >
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users