R: [Asterisk-Users] Problem setting up TDM22B card

[Lyle Giese]

I have not seen the output of modprob zaptel in this thread, which has 
to take place before loading the other kernel drivers.

Lyle


so
mesh s wrote:

>Hi,
>
>I changed the mother board (MB) but it is giving still
>the same problem.
>  
>
>>>>>>>>>ouput of dmesg|tail >>>>>>>>>>>>>>>>
>>>>>>>>>                  
>>>>>>>>>
>f6 != 58
>f7 != 59
>f8 != 58
>f9 != 59
>fa != 58
>fb != 59
>fc != 58
>fd != 59
>fe != 58
>Freshmaker failed register test
>  
>
>and I have also configured zaptel.conf correctly.
>
>Whatz next? Can I assume that it is a hardware
>problem?
>
>Regards,
>Somesh S. Shanbhag
>
>
>--- John Novack <jnovack at stromberg-carlson.org> wrote:
>
>  
>
>>somesh s wrote:
>>
>>    
>>
>>>Hi,
>>>
>>>I didn't get any solution in the mailing list.
>>>      
>>>
>>[http://asterisk.linkx.net/asteriskusers/200409/msg01167]
>>    
>>
>>>What should be the next step?
>>>
>>>Changing the machine???????
>>>Is it machine dependent?...
>>>
>>>Regards,
>>>Somesh S. Shanbhag
>>>
>>> 
>>>
>>>      
>>>
>>Have you talked with Digium support?
>>
>>Their answer almost always is:
>>
>>"Try another Motherboard"
>>They won't supply a list that is known to work, only
>>ones that are known 
>>NOT to work.
>> From my limited experience, even if the MB says it
>>is PCI 2.2, the TDM 
>>card may or may not work.
>>
>>If you don't want to change machines, then  use an
>>ATA or two Sipura's 
>>work great.
>>
>>John Novack
>>
>>    
>>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051012/84132b14/attachment.htm