[Asterisk-Users] TDM02B card difficulties

[Min Qiu]

Tzafrir,

The problem was indeed as you discribed.  Digium support
help me to straight out my setting by doing exactly what
you said.  I was simply mixed up with channels config
by trying different combination of signal, channels value 
in zaptel.conf and zapata.conf.

Thanks a lot,

Min


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Tzafrir Cohen
> Sent: Monday, October 10, 2005 4:16 PM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] TDM02B card difficulties
> 
> 
> On Mon, Oct 10, 2005 at 10:27:19AM -0400, Min Qiu wrote:
> > Thank you for your respond, please see more detail inline...
> > 
> > Min
> > 
> > > -----Original Message-----
> > > From: asterisk-users-bounces at lists.digium.com 
> > > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> > > Tzafrir Cohen
> > > Sent: Friday, October 07, 2005 4:57 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] TDM02B card difficulties
> > > 
> > > 
> > > On Fri, Oct 07, 2005 at 03:41:43PM -0400, Min Qiu wrote:
> > > > 
> > > > Hi all,
> > > > 
> > > > I just installed an TDM02B.  My system is a dell pc with
> > > > linux 2.6.12-1.1456_FC4
> > > > asterisk-1.2.0-beta1
> > > > zaptel-1.2.0-beta1
> > > > libpri-1.2.0-beta1
> > > > 
> > > > in /etc/zaptel.conf I have (all others are default):
> > > > fxsks=3-4                       <--- I saw light in the ports
> > > > channels=1-2                    <--- change it to 3-4 has 
> > > same result
> > > 
> > > cat /proc/zaptel/1 to see the channel numbers.
> > 
> > [root at nmsd0 mqiu]# cat /proc/zaptel/1
> > Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
> > 
> >            1 WCTDM/0/0
> >            2 WCTDM/0/1
> >            3 WCTDM/0/2
> >            4 WCTDM/0/3
> 
> None of them has been configured by ztcfg, right?
> 
> What's the output of ztcfg -vv
> 
> > 
> > > 
> > > Anyway, the last line is incorrect. It should be used in 
> > > zapata.conf and
> > > not in zaptel.conf .
> > 
> > The zaptel.conf has "channels=..." as an example.  Took the line
> > out I have:
> 
> It shouldn't . 
> 
> Could you please post /etc/zaptel.conf and /etc/asterisk/zapata.conf ?
> 
> -- 
> Tzafrir Cohen         | tzafrir at jbr.cohens.org.il | VIM is
> http://tzafrir.org.il |                           | a Mutt's  
> tzafrir at cohens.org.il |                           |  best
> ICQ# 16849755         |                           | friend
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>