[Asterisk-Users] asterisk, cisco 3640's and DIDs...

[info at beprojects.com]

It's supported on my PRI interface:

controller T1 1/0
  framing esf
  linecode b8zs
  pri-group timeslots 1-24

interface Serial1/0:23
  no ip address
  isdn switch-type primary-ni
  isdn incoming-voice voice
  no cdp enable


dial-peer voice 200 pots
  description Match all inbound POTS calls
  destination-pattern .T
  direct-inward-dial
  port 1/0:23
  forward-digits all



Tim Pozar wrote:
> Greg Oliver wrote:
> 
>> Add direct-inward-dial to your dial peer and it should work fine.
> 
> 
> That command is only supported for POTS interfaces. :-(  Not PRIs (aka 
> ISDN in cisco parlance).
> 
> Tim
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
> 
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users