[Asterisk-Users] asterisk@home isdn

[Alejandro Vargas]

2005/11/29, Francesco Peeters <Francesco at fampeeters.com>:
> Then add to a startup file like rc.local:
> modprobe zaptel
> modprobe zaphfc
> ztcfg -vv
>
> to start and initialize the cards...


I'll try... when somebody goes to reset the machine. I'm configuring
it through ssh and it hanged when I was trying zaphfc module. The
lastest problems I had where asterisk didn't start. The error was it
could'nt access the device.

Lastest problems I had (after reinstalling asteriskathome and removing
some modules) where like "ZT_SPANCONFIG failed on span 1: Invalid
argument (22)" in this case:

[root at asterisk1 zaphfc]# ztcfg -v

Zaptel Configuration
======================

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

Channel map:

Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)

3 channels configured.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)


And trying to start asterisk I received this errors:


Nov 29 14:14:25 WARNING[4240] chan_zap.c: Unable to specify channel 1:
Device or resource busy
Nov 29 14:14:25 ERROR[4240] chan_zap.c: Unable to open channel 1:
Device or resource busy
here = 0, tmp->channel = 1, channel = 1
Nov 29 14:14:25 ERROR[4240] chan_zap.c: Unable to register channel '1-2'
Nov 29 14:14:25 WARNING[4240] loader.c: chan_zap.so: load_module
failed, returning -1
Nov 29 14:14:25 WARNING[4240] loader.c: Loading module chan_zap.so failed!
Ahd ztcfg


--
Alejandro Vargas