[Asterisk-Users] Sangoma problems!?

[Michael Bielicki]

hat is the content of your wanpipe?.conf files ?

On 11/26/05, Kevin P. Fleming <kpfleming at digium.com> wrote:
>
> Stig Even Larsen wrote:
> > I'm having problems connecting my Sangoma cards to our PRI (E1)
> > interface. It seems that the card get connected (green led), but
> > Asterisk reports:
> > Status: Provisioned, Down, Active.
> >
> > When I install another Sangoma card on the same system (pri_net), and
> > connect the two cards with a PRI cross-over cable both cards get
> > connected (green led) and Asterisk reports both spans:
> > Status: Provisioned, UP, Active
>
> Your telco has not brought the D-channel on your PRI circuit to 'up'
> state yet. Plug the card back in, make the red alarm go away, and then
> call them and tell them you are ready to use the circuit.
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



--
Michal Bielicki
Halo Kwadrat Sp. z o.o.
http://www.asterisk.pl/
http://www.openpbx.org/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051128/b4b45bed/attachment.htm