[Asterisk-Users] Multiple HFC-PCI cards in mixed modes (TE+NT) won't work!...

[Francesco Peeters]

On Fri, November 25, 2005 9:29, Kristof Hardy said:
> Francesco Peeters wrote:
>> I compiled 1.2 and bristuff 0.3.0 Pre1 yesterday late and that now seems
>> to work! * is up and running *with* 2nd card in NT mode...
>
> Nice to hear *1.2 and bristuff 0.3pre1 makes a difference..
>
>

Just switched the config around so the NT mode card was active, and I got
dialtone, etc.  :-)

Now the hardest part: Connecting the HFC clock lines of both cards to
eachother (the soldering iron is ready, just have to shutdown the server
and take out the cards) because I need the NT card to be slave to the TE
card.
(Both cards running their own clocks doesn't seem to agree with asterisk
anyway, so it's a good thing I was planning on this all along!)

This is the most critical part of the test: Once I start soldering on the
cards there is no more returning, no warranty, etc.

But I know now that both modes work with 1.2, so it's time to take that
plunge!

I'll let the list know when I'm done!

-- 
Francesco Peeters
----
GPG Key = AA69 E7C6 1D8A F148 160C  D5C4 9943 6E38 D5E3 7704
If your program doesn't recognize my signature, please visit
http://www.CAcert.org/index.php?id=3 to retrieve the Root CA certificate.