[Asterisk-Users] Help need to reset Adit 600 for Asterisk install

Darren Wright dwright at d2-tech.com
Wed Nov 23 08:48:16 MST 2005


What about telnet access?  If you don't know the Ethernet IP use a
packet sniffer to detect it and then telnet to it.   It may not be
password protected.

-D


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
jim at addaweb.net
Sent: Wednesday, November 23, 2005 9:59 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Help need to reset Adit 600 for Asterisk
install

Thanks Jerry,

I have called Carrier Access and they can reset the password but for a
considerable fee.   We have serial access but after it boots it
immediately
asks for a username and password.  We have the username but the password
is
not what it is suppose to be.   There's a reset switch on the faceplate
but
I think the LOCAL SET is OFF and that is why it doesn't respond.  Their
manual says the Reset switch is not under the control of LOCAL SET, yet
it
doesn't seem to work.  Well, we might not know the proper boot sequence.
It
contains flash memory and there is a timing that important to that reset
procedure.  Anyone's help is much appreciated.

--Jim   

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jerry
Jones
Sent: Wednesday, November 23, 2005 7:40 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Help need to reset Adit 600 for Asterisk
install

Not sure but are you connecting via serial or ehternet? Seems to be the
serial had a way to do this easily on bootup. Otherwise I would be
interested for future reference. Carrier Access does have a good support
team, just need to know your serial number.

On Nov 23, 2005, at 12:13 AM, <jim at addaweb.net> <jim at addaweb.net> wrote:

> Looking for a way to hard reset a ADIT 600 just purchased used.   
> But it
> seems to have a master password already set.  We've tried the front 
> reset but maybe we don't have the right sequence of boot order.  Any 
> help would be much appreciated?  - Jim
>
>
>
> _______________________________________________
> --Bandwidth and Colocation sponsored by Easynews.com --
>
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
--Bandwidth and Colocation sponsored by Easynews.com --

Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list