[Asterisk-Users] Setting up FXO in router

[pdhales at optusnet.com.au]

What do you know about the router?

Maybe there's something hiding in the config somewhere...

Can you program the router to send incoming calls to Asterisk? 
That might give you a clue as to how it all works...

PaulH
  ----- Original Message ----- 
  From: Gary Stark 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Wednesday, November 23, 2005 12:35 AM
  Subject: Re: [Asterisk-Users] Setting up FXO in router


  Paul,

  Thanx for your suggestions, but no luck ths far.


  On 11/22/05, pdhales at optusnet.com.au < pdhales at optusnet.com.au> wrote:
    Once when setting up a SIP based mobile phone gateway, I had to use 
    (SIP/${EXTEN)@rupert) and set up an entry in sip.conf for rupert.

    This lets you use passwords, etc.

    Worth a try, if nothing else.

    PaulH
      ----- Original Message ----- 
      From: Gary Stark 
      To: Asterisk Users Mailing List - Non-Commercial Discussion 
      Sent: Tuesday, November 22, 2005 1:35 PM
      Subject: Re: [Asterisk-Users] Setting up FXO in router


      Many thanx Paul,

      Yes, I am having fun with this stuff...

      If I set this to 

      exten => _9.,1,Dial(SIP/${EXTEN}@192.168.0.5)

      I get the following messages in the log file and on the CLI console.



channel.c: Channel allocation failed: Can't create alert pipe!chan_local.c: Unable to allocate channel structure(s)app_dial.c: Unable to create local channel for call forward to '
Local/93869478 at default' (cause = 0)If I try exten => _9.,1,Dial(IAX2/${EXTEN}@192.168.0.5
)I then get chan_iax2.c: Rejected connect attempt from 192.168.0.5, who was trying to reach 's@'
chan_iax2.c: Call rejected by 192.168.0.5: No authority foundI'm getting close, but need some assistance for that last few yards. :)





      On 11/22/05, pdhales at optusnet.com.au < pdhales at optusnet.com.au > wrote: 
        Some of the sip gear just needs a DIAL(SIP/${EXTEN}@192.168.0.375 ) to make it dial out.

        later,

        PaulH

          ----- Original Message ----- 
          From: Gary Stark 
          To: asterisk-users at lists.digium.com 
          Sent: Tuesday, November 22, 2005 12:09 PM
          Subject: [Asterisk-Users] Setting up FXO in router


          G'day y'all.

          I have a mostly working asterisk installation, and attached to my LAN  is a a Netcomm NB5W router/gateway, which includes two FXS ports and one FXO port.

          I have the FXS ports configured via the internal web configuration on the router, and they're happily working as extensions from my asterisk server (albeit with a couple of minor hang-up detection issues) but I now want to use the FXO port on the router as well, but I cannot see anything, anywhere, that tells me how I can start on this aspect of the configuration of the whole system.

          Can somebody please oint me at some documentation that is relevant to this?

          Thanx in advance for any and all assistance.



          -- 
          g.
          Gary Stark
          gary.stark at gmail.com 


----------------------------------------------------------------------


          _______________________________________________
          --Bandwidth and Colocation sponsored by Easynews.com --

          Asterisk-Users mailing list
          Asterisk-Users at lists.digium.com
          http://lists.digium.com/mailman/listinfo/asterisk-users
          To UNSUBSCRIBE or update options visit:
             http://lists.digium.com/mailman/listinfo/asterisk-users 


        _______________________________________________
        --Bandwidth and Colocation sponsored by Easynews.com --

        Asterisk-Users mailing list
        Asterisk-Users at lists.digium.com
        http://lists.digium.com/mailman/listinfo/asterisk-users
        To UNSUBSCRIBE or update options visit:
          http://lists.digium.com/mailman/listinfo/asterisk-users 





      -- 
      g.
      Gary Stark
      gary.stark at gmail.com 


--------------------------------------------------------------------------


      _______________________________________________
      --Bandwidth and Colocation sponsored by Easynews.com --

      Asterisk-Users mailing list
      Asterisk-Users at lists.digium.com
      http://lists.digium.com/mailman/listinfo/asterisk-users
      To UNSUBSCRIBE or update options visit:
         http://lists.digium.com/mailman/listinfo/asterisk-users


    _______________________________________________
    --Bandwidth and Colocation sponsored by Easynews.com --

    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
      http://lists.digium.com/mailman/listinfo/asterisk-users





  -- 
  g.
  Gary Stark
  gary.stark at gmail.com 


------------------------------------------------------------------------------


  _______________________________________________
  --Bandwidth and Colocation sponsored by Easynews.com --

  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051122/4f5f9719/attachment.htm